| 期 |
标题 |
文件 |
| 卷 39, 编号 2 (2018) |
Study of Friction and Wear Characteristics of the Friction Pair of Centrifugal Brake Rollers |
(Eng)
|
|
Nosko A., Safronov E., Soloviev V.
|
| 卷 39, 编号 2 (2018) |
Test Analysis of Friction Couples With Solid Lubricant Coatings under Ground–Space Conditions and Prediction of Tribological Characteristics |
(Eng)
|
|
Khopin P.
|
| 卷 39, 编号 1 (2018) |
Modeling of Microstructures and Analysis of Abrasive Wear of Arc-Welded Hadfield Steel |
(Eng)
|
|
Jankauskas V., Choteborsky R., Antonov M., Katinas E.
|
| 卷 39, 编号 1 (2018) |
Modeling Solutions of Axisymmetric Contact Problems Using Dimensionality Reduction Method with or without Adhesion |
(Eng)
|
|
Janahmadov A., Dyshin O.
|
| 卷 39, 编号 1 (2018) |
Movement of a Solid Body across a Horizontal Plane with a Circular Area of the Bearing and Uniform Load Distribution under Asymmetric Orthotropic Friction |
(Eng)
|
|
Dmitriev N., Silantyeva O.
|
| 卷 39, 编号 1 (2018) |
Contact Problems for Rolling with Slip for Viscoelastic Solids |
(Eng)
|
|
Miftakhova A.
|
| 卷 39, 编号 1 (2018) |
Calculated Model of Wedge-Shaped Sliding Support Operating on Lubricating Material |
(Eng)
|
|
Akhverdiev K., Mukutadze M., Lagunova E., Vasilenko V.
|
| 卷 39, 编号 1 (2018) |
Impact of Tribological Properties of Fibrous Materials on Mechanical Processing |
(Eng)
|
|
Stepanova T.
|
| 卷 39, 编号 1 (2018) |
Wear Resistance of Amorphous-Crystalline Coatings with Lubricants |
(Eng)
|
|
Babak V., Shchepetov V.
|
| 卷 39, 编号 1 (2018) |
Effect of Copper Content on Tribological Characteristics of Fe−C−Cu Composites |
(Eng)
|
|
Dyachkova L., Feldshtein E., Vityaz P., Błoch B., Voronetskaya L.
|
| 卷 39, 编号 1 (2018) |
Study of the Performance of Copper Coatings Formed by Electroplating and Deformation Cladding with a Flexible Tool |
(Eng)
|
|
Sheleg V., Levantsevich M., Pilipchuk E., Dema R.
|
| 卷 39, 编号 1 (2018) |
Study of the Tribotechnical Properties of a Cutting Tool Made of Sintered Powder Tool Materials |
(Eng)
|
|
Krioni N., Migranov M., Fox-Rabinovich G., Shuster L.
|
| 卷 39, 编号 1 (2018) |
Calculating Life Spans of Bearings Taking into Consideration the Wear and Failure of PTFE Cages |
(Eng)
|
|
Balyakin V., Zhil’nikov E., Pilla C.
|
| 卷 39, 编号 1 (2018) |
Contact Stiffness of Machine Components and the Influence of the Microgeometry of the Contact Surfaces on It |
(Eng)
|
|
Izmailov V., Novoselova M.
|
| 卷 39, 编号 1 (2018) |
Contact Problem for a Viscoelastic Half-Space and a Rough Rigid Cylinder under the Conditions of Hydrodynamic Lubrication |
(Eng)
|
|
Shpenev A.
|
| 卷 38, 编号 6 (2017) |
New Approach for Prediction of Non-Conformal Contact Fatigue Life Considering Lubrication Performance Parameters |
(Eng)
|
|
An S., Lee S., Son J., Cho Y.
|
| 卷 38, 编号 6 (2017) |
Fluid Flow Analysis for Friction Torque around Rolling Element in Ball Bearings |
(Eng)
|
|
Kim C., Jo J.
|
| 卷 38, 编号 6 (2017) |
Multi-Objective Optimization of Spur Gearbox with Inclusion of Tribological Aspects |
(Eng)
|
|
Patil M., Ramkumar P., Shankar K.
|
| 卷 38, 编号 6 (2017) |
Application of Semi-Hertzian Approach to Predict the Dynamic Behavior of Railway Vehicles Through a Wear Evolution Model |
(Eng)
|
|
Pradhan S., Samantaray A., Bhattacharyya R.
|
| 卷 38, 编号 6 (2017) |
High-Speed Contact Study between a Ti-6-Al-4V Tool and an Abradable Coating Using Ballistic Benches and a Dynamic Compensation Approach |
(Eng)
|
|
Cappella A., Vincent J., Philippon S., Faure L.
|
| 卷 38, 编号 6 (2017) |
The Effect of WS2 Powder Added Lubricant on Friction and Wear of Tetrahedral Amorphous Carbon Coating Films |
(Eng)
|
|
Ean Y., Kim J., Choi S., Hsien W., Siambun N., Kim S.
|
| 卷 38, 编号 6 (2017) |
Tribological Properties of a C/C–SiC–Cu Composite Brake Disc |
(Eng)
|
|
Goo B.
|
| 卷 38, 编号 6 (2017) |
Tribological Performance of Laser-Textured Polyoxymethylene under Boundary Lubricated Sliding Condition |
(Eng)
|
|
Jeong J., Cho M.
|
| 卷 38, 编号 6 (2017) |
Scratch Behavior of ZrO2 Thin Film Prepared by Atomic Layer Deposition Method on Silicon Wafer |
(Eng)
|
|
Kim S., Yang B., An J., Ahn H.
|
| 卷 38, 编号 6 (2017) |
Analysis of Physical Friction Characteristics about Handwrite Feeling—Rough and Smooth |
(Eng)
|
|
Park J., Kim M., Lee Y.
|
| 176 - 200 的 366 信息 |
<< < 3 4 5 6 7 8 9 10 11 12 > >>
|
