Mixed Coupling on Stripline and Microstrip Bandpass Filters
- Authors: Zakharov A.V.1, Il’chenko M.E.1
-
Affiliations:
- Igor Sikorsky Kyiv Polytechnic Institute (National Technical University of Ukraine)
- Issue: Vol 63, No 6 (2018)
- Pages: 596-606
- Section: Physical Processes in Electronic Devices
- URL: https://journals.rcsi.science/1064-2269/article/view/199866
- DOI: https://doi.org/10.1134/S1064226918060268
- ID: 199866
Cite item
Abstract
The problems of designing stripline and microstrip bandpass filters with mixed coupling, including the magnetic and electric components of the interaction, are considered. It is shown that the transmission zeros corresponding to mixed coupling coefficients can be shifted along the frequency axis by changing the shape of the stepped-impedance resonators. It is confirmed that N-resonator planar filters can have (N–1) transmission zeros. Designs of microstrip filters with combined coupling, which include mixed coupling and the traditionally used magnetic and electric coupling, are proposed. It is shown that the number of transmission zeros of such filters is smaller than for filters with only mixed coupling, but their designing and tuning are less labor-consuming. The data of the experiment and computer simulation are presented.
About the authors
A. V. Zakharov
Igor Sikorsky Kyiv Polytechnic Institute (National Technical University of Ukraine)
Author for correspondence.
Email: azakharov217@gmail.com
Ukraine, Kiev, 03056
M. E. Il’chenko
Igor Sikorsky Kyiv Polytechnic Institute (National Technical University of Ukraine)
Email: azakharov217@gmail.com
Ukraine, Kiev, 03056