Epitaxial growth of cadmium sulfide films on silicon


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

A 300-nm-thick cadmium sulfide epitaxial layer on silicon was grown for the first time. The grown was performed by the method of evaporation and condensation in a quasi-closed volume at a substrate temperature of 650°C and a growth time of 4 s. In order to avoid a chemical reaction between silicon and cadmium sulfide (at this temperature, the rate constant of the reaction is ~103) and to prevent etching of silicon by sulfur, a high-quality silicon carbide buffer layer ~100 nm thick was preliminarily synthesized by the substitution of atoms on the silicon surface. The ellipsometric, Raman, electron diffraction, and trace element analyses showed a high structural perfection of the CdS layer and the absence of a polycrystalline phase.

About the authors

V. V. Antipov

Institute of Problems of Mechanical Engineering; St. Petersburg State Institute of Technology (Technical University)

Email: sergey.a.kukushkin@gmail.com
Russian Federation, Bolshoi pr. 61, St. Petersburg, 199178; Moskovskii pr. 26, St. Petersburg, 190013

S. A. Kukushkin

Institute of Problems of Mechanical Engineering; St. Petersburg National Research University of Information Technologies, Mechanics and Optics

Author for correspondence.
Email: sergey.a.kukushkin@gmail.com
Russian Federation, Bolshoi pr. 61, St. Petersburg, 199178; Kronverkskii pr. 49, St. Petersburg, 197101

A. V. Osipov

Institute of Problems of Mechanical Engineering; St. Petersburg National Research University of Information Technologies, Mechanics and Optics

Email: sergey.a.kukushkin@gmail.com
Russian Federation, Bolshoi pr. 61, St. Petersburg, 199178; Kronverkskii pr. 49, St. Petersburg, 197101

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2016 Pleiades Publishing, Ltd.