Specific Features of Microstructure Formation in Co–Cr–Ni–W–Ta Alloys and Their Mechanical Properties


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The microstructure and mechanical properties of three experimental compositions of a new heat- and corrosion-resistant cast cobalt-based alloy have been investigated. It is established that compositions are reinforced as a result of the formation of carbide phases in them during aging. It is shown that the ultimate and yield strength of this material at a temperature of 20°C are, respectively, 650(50) and 440(10) MPa. An analysis of the heat resistance of alloy samples has revealed that they withstand loads of 170 MPa (for 329 h) and 25 MPa (for 1093 h) at temperatures of 800 and 1100°C, respectively. The mechanical properties of the new alloy are superior of those of the foreign heat-resistant alloy FSX-414.

作者简介

I. Mazalov

All-Russian Scientific Research Institute of Aviation Materials

Email: sulyanova@gmail.com
俄罗斯联邦, Moscow, 105005

D. Suhov

All-Russian Scientific Research Institute of Aviation Materials

Email: sulyanova@gmail.com
俄罗斯联邦, Moscow, 105005

S. Nerush

All-Russian Scientific Research Institute of Aviation Materials

Email: sulyanova@gmail.com
俄罗斯联邦, Moscow, 105005

E. Sulyanova

All-Russian Scientific Research Institute of Aviation Materials

编辑信件的主要联系方式.
Email: sulyanova@gmail.com
俄罗斯联邦, Moscow, 105005

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Inc., 2019