Automation of Pulse Electric Strength Test of Electronic Component Base
- Авторлар: Dyatlov N.1, Epifantsev K.1, Skorobogatov P.1
-
Мекемелер:
- National Research Nuclear University MEPhI
- Шығарылым: Том 48, № 5 (2019)
- Беттер: 340-345
- Бөлім: Article
- URL: https://journals.rcsi.science/1063-7397/article/view/187190
- DOI: https://doi.org/10.1134/S1063739719050032
- ID: 187190
Дәйексөз келтіру
Аннотация
During the pulse electric strength test of the electronic component base (ECB), the single pulsing electrical overstress (EOS) of increasing amplitude affects the tested specimen until a functional or parametric failure of the product appears. In order to reduce the test time and minimize operator intervention, a specialized test bench was designed to perform the test in automatic mode. To have the possibility to switch the specimen between a sensitive measuring instrument and a high-voltage pulse generator, a mechanical switching device was developed, which also operates as a connecting link between test bench components. After putting the test bench into operation, the time of preparation and the test significantly decreases. Furthermore, it became possible to test the electronic component base on the multiple actions of voltage pulses.
Авторлар туралы
N. Dyatlov
National Research Nuclear University MEPhI
Хат алмасуға жауапты Автор.
Email: nsdyat@spels.ru
Ресей, Moscow, 115409
K. Epifantsev
National Research Nuclear University MEPhI
Хат алмасуға жауапты Автор.
Email: kaepif@spels.ru
Ресей, Moscow, 115409
P. Skorobogatov
National Research Nuclear University MEPhI
Хат алмасуға жауапты Автор.
Email: pkskor@spels.ru
Ресей, Moscow, 115409