On the Wear Comparative Analysis of Cutting Tools Made of Composite Materials Based on Polycrystalline Cubic Boron Nitride when Finish Turning of AISI D2 (EN X153CrMoV12) Steel

Michal Ociepa; Mariusz Jenek; Eugene Feldshtein

doi:10.3103/S1063457618060059

On the Wear Comparative Analysis of Cutting Tools Made of Composite Materials Based on Polycrystalline Cubic Boron Nitride when Finish Turning of AISI D2 (EN X153CrMoV12) Steel

作者: Ociepa M.¹, Jenek M.¹, Feldshtein E.¹
隶属关系:
1. Institute of Machine Building and Operation
期: 卷 40, 编号 6 (2018)
页面: 396-401
栏目: Investigation of Machining Processes
URL: https://journals.rcsi.science/1063-4576/article/view/186359
DOI: https://doi.org/10.3103/S1063457618060059
ID: 186359

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

This study presents the results of research on the condition of low content polycrystalline cubic boron nitride cutting tools (cBN-L) when finish turning of hardened AISI D2 tool steel. The least changes in the condition of wedges throughout the investigated turning feeds were observed for the composite cBN020 whereas the highest wear intensity was found for the composite cBN200. For all researched cutting materials, abrasive wear, as well intense adhesion were observed.