| Issue |
Title |
File |
| Vol 53, No 5 (2017) |
Ultrasonic control of welded joints in a Du800-type pipeline. Part II: Improving image quality and comparison with X-ray testing results |
(Eng)
|
|
Bazulin E.G.
|
| Vol 53, No 5 (2017) |
Comparative analysis of different methods of acoustic beam angle measurement and calculation of directivity patterns for angle piezoelectric transducers |
(Eng)
|
|
Kozlov A.V., Kozlov V.N., Podolskiy A.V., Shchukin I.V.
|
| Vol 53, No 5 (2017) |
Using a probabilistic model to estimate the reliability of locating acoustic emission sources |
(Eng)
|
|
Bobrov A.L.
|
| Vol 53, No 5 (2017) |
Acoustic-emission quality control of plastically deformed blanks |
(Eng)
|
|
Nosov V.V.
|
| Vol 53, No 4 (2017) |
Theoretical Aspects of Applying Lamb Waves in Nondestructive Testing of Anisotropic Media |
(Eng)
|
|
Ilyashenko A.V., Kuznetsov S.V.
|
| Vol 53, No 4 (2017) |
Directional Characteristics of a Laser Pulsed Thermoacoustic Emitter in Nonmagnetic Metals |
(Eng)
|
|
Gurevich S.Y., Petrov Y.V., Golubev E.V.
|
| Vol 53, No 4 (2017) |
Localization of Reflectors in Plates by Ultrasonic Testing with Lamb Waves |
(Eng)
|
|
Perov D.V., Rinkevich A.B.
|
| Vol 53, No 4 (2017) |
On Using an Acoustic Antenna Array for Testing Thermal Damages in Austenitic Steel by the Spectral Method |
(Eng)
|
|
Uglov A.L., Khlybov A.A., Pichkov S.N., Shishulin D.N.
|
| Vol 53, No 4 (2017) |
On the Allowance for Direct Piezoelectric Effect when Studying the Pulsed Operation Mode of a Piezoelectric Emitter by d’Alambert’s Method |
(Eng)
|
|
Konovalov S.I., Kuz’menko A.G.
|
| Vol 53, No 4 (2017) |
Examining the Experience of Revealing Delayed Deformation Corrosion Cracking |
(Eng)
|
|
Razygraev A.N., Razygraev N.P., Dikov I.A.
|
| Vol 53, No 4 (2017) |
Possibilities for Increasing the Efficiency of Contactless Emitters of Acoustic Waves |
(Eng)
|
|
Tolipov K.B.
|
| Vol 53, No 4 (2017) |
Finite Element Modelling of Lamb Waves Propagation in 3D Plates and Brass Tubes for Damage Detection |
(Eng)
|
|
Nirbhay M., Dixit A., Misra R.K.
|
| Vol 53, No 3 (2017) |
Ultrasonic control of welded joints in a Du800-type pipeline. Part I: Restoring reflector images by digital focusing with an antenna |
(Eng)
|
|
Bazulin E.G.
|
| Vol 53, No 3 (2017) |
Estimation of the sensitivity of acoustic reflectometry to flaws in heat-exchange pipes |
(Eng)
|
|
Murav’eva O.V., Strizhak V.A., Pryakhin A.V.
|
| Vol 53, No 3 (2017) |
Input electrical impedance and efficiency of ultrasonic transducers with phased excitation of two piezoelectric plates |
(Eng)
|
|
Bystrova N.A., Stepanov B.G.
|
| Vol 53, No 2 (2017) |
Estimating the strength of welded hull elements of a submersible based on the micromechanical model of temporal dependences of acoustic-emission parameters |
(Eng)
|
|
Nosov V.V., Zelenskii N.A.
|
| Vol 53, No 2 (2017) |
Analysis of errors in location of flaws in multipass welds using different clustering methods |
(Eng)
|
|
Stepanova L.N., Kabanov S.I., Ramazanov I.S., Kanifadin K.V.
|
| Vol 53, No 1 (2017) |
Generalized coefficients for measuring mechanical stresses in carbon and low-alloyed steels by the acoustoelasticity method |
(Eng)
|
|
Pasmanik L.A., Smirnov V.A., Modestov V.S., Pivkov A.V., Kamyshev A.V., Makarov S.V.
|
| Vol 53, No 1 (2017) |
Allowing for inhomogeneous anisotropy of a welded joint when reconstructing reflector images from echo signals received by an ultrasonic antenna array |
(Eng)
|
|
Bazulin E.G.
|
| Vol 53, No 1 (2017) |
Using antenna arrays for reference-free measurement of speed of ultrasound and thickness of concrete articles |
(Eng)
|
|
Kachanov V.K., Sokolov I.V., Kontsov R.V., Sinitsyn A.A.
|
| Vol 53, No 1 (2017) |
Advanced-reliability acoustic-emission transducers |
(Eng)
|
|
Danyuk A.V., Rastegaev I.A., Merson D.L., Vinogradov A.
|
| Vol 53, No 1 (2017) |
Acoustic investigations of the steel samples deformation during the tensile |
(Eng)
|
|
Ivanova Y., Partalin T., Pashkuleva D.
|
| Vol 52, No 12 (2016) |
Excitation of a circular-aperture transducer with an echo pulse reflected from a spherical surface |
(Eng)
|
|
Perov D.V., Nemytova O.V., Rinkevich A.B.
|
| Vol 52, No 12 (2016) |
Experimental research into possibilities and peculiarities of ultrasonic testing of additive manufactured parts |
(Eng)
|
|
Aleshin N.P., Murashov V.V., Shchipakov N.A., Krasnov I.S., Lozhkova D.S.
|
| Vol 52, No 12 (2016) |
Assessing the results of ultrasonic testing of additive manufactured parts with alternative methods |
(Eng)
|
|
Aleshin N.P., Grigor’ev M.V., Murashov V.V., Krasnov I.S., Krupnina O.A., Smorodinskii Y.G.
|
| 126 - 150 of 185 Items |
<< < 1 2 3 4 5 6 7 8 > >>
|
