Constructive-Technological Features of a Rotary Drawing of Geometrically Complex Hollow Shafts for Gas Turbine Engines


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

For manufacturing thin-walled shafts for gas turbine engines of heat-resistant steels and alloys, the labor-intensive multistage drawing of a sheet of the workpiece in dies is used. The following problem is posed in the work: to study the possibility of manufacturing such parts by a less labor-intensive method: the rotary drawing of a thick-walled workpiece (sheet) by a spinning lathe by rolling a roll under hot deformation conditions. For this purpose, the computer and physical modeling of the rolling process of hollow shafts of a thick-sheet steel workpiece was carried out. The important parameters of the technological process of manufacturing a geometrically complex shaft are determined: the initial workpiece shape and the changes in its shape when rolled on a mandrel mounted on the spindle of the spinning lathe of the PNC 600 type. The research results are used for rolling full-size shafts of chromium steel of the EI962-Sh grade.

作者简介

M. Nagimov

Institute of Metal Superplasticity Problems, Ufa

Email: ryusukhorukov@gmail.com
俄罗斯联邦, Bashkortostan, 450001

Sh. Mukhtarov

Institute of Metal Superplasticity Problems, Ufa

Email: ryusukhorukov@gmail.com
俄罗斯联邦, Bashkortostan, 450001

G. Raab

Institute of Physics of Advanced Materials (IPAM); Blagonravov Institute of Mechanical Engineering

Email: ryusukhorukov@gmail.com
俄罗斯联邦, Bashkortostan, 450008; Moscow, 101990

R. Sukhorukov

Blagonravov Institute of Mechanical Engineering

编辑信件的主要联系方式.
Email: ryusukhorukov@gmail.com
俄罗斯联邦, Moscow, 101990

F. Utyashev

Institute of Metal Superplasticity Problems, Ufa

Email: ryusukhorukov@gmail.com
俄罗斯联邦, Bashkortostan, 450001

补充文件

附件文件
动作
1. JATS XML

版权所有 © Allerton Press, Inc., 2017