| Edição |
Título |
Arquivo |
| Volume 46, Nº 6 (2017) |
Improved Efficiency of the Process of Low-Temperature Plasma Hardening Based on its Monitoring |
(Eng)
|
|
Azikov N., Brzhozovskii B., Brovkova M., Zinina E., Martynov V., Susskii A.
|
| Volume 46, Nº 6 (2017) |
Computer-Aided Modeling of the Milled Groove Side Surface |
(Eng)
|
|
Utenkov V., Shirshov A., Bykov P., Osipov V.
|
| Volume 46, Nº 6 (2017) |
Constructive-Technological Features of a Rotary Drawing of Geometrically Complex Hollow Shafts for Gas Turbine Engines |
(Eng)
|
|
Nagimov M., Mukhtarov S., Raab G., Sukhorukov R., Utyashev F.
|
| Volume 46, Nº 5 (2017) |
Optimization of organic-containing wastewater and sludge treatment systems |
(Eng)
|
|
Pyndak V., Novikov A., Shtepa V.
|
| Volume 46, Nº 5 (2017) |
Composite-friendly approach to certification of advanced materials and fabrication methods used in aviation industry |
(Eng)
|
|
Dubinskii S., Safonov A.
|
| Volume 46, Nº 3 (2017) |
Choosing a scheme for specifying the transverse feed during grinding of P9M4K8 plates using a Norton Vitrium abrasive wheel taking into account burns and microhardness |
(Eng)
|
|
Soler Y., Van Canh N.
|
| Volume 46, Nº 3 (2017) |
Simulation of control of temperature mode in cutting area on the basis of fuzzy logic |
(Eng)
|
|
Bobyr M., Kulabukhov S.
|
| Volume 46, Nº 3 (2017) |
Computation and comparison of two electric air heaters for industrial use |
(Eng)
|
|
Stulov V.
|
| Volume 46, Nº 3 (2017) |
A method for calculating the parameters for manufacturing preforms via radial braiding |
(Eng)
|
|
Samipour S., Khaliulin V., Batrakov V.
|
| Volume 46, Nº 2 (2017) |
On the problems of modernizing equipment for vacuum carburization |
(Eng)
|
|
Fakhurtdinov R., Pakhomova S., Ryzhova M.
|
| Volume 46, Nº 2 (2017) |
Investigation of deformation behavior and fracture of ceramic coatings by the acoustic emission method |
(Eng)
|
|
Klyatskina E., Salvador M., Segovia E., Carpio P., Borrell A., Snachez E., Stolyarov V.
|
| Volume 46, Nº 2 (2017) |
Analysis of label position stabilization methods on automatic packaging machines |
(Eng)
|
|
Salamandra B.
|
| Volume 45, Nº 3 (2016) |
Development and postoperation state of Ni–Co–Cr–Al–Y plasma heat-resistant coating |
(Eng)
|
|
Tarasenko Y., Tsareva I., Berdnik O., Fel’ Y., Krivina L.
|
| Volume 45, Nº 3 (2016) |
Influence of laser spot overlap effect on residual stresses during laser-shock-wave processing of materials |
(Eng)
|
|
Sakhvadze G., Gavrilina L., Kikvidze O.
|
| Volume 45, Nº 3 (2016) |
Cooling of a cylindrical crystallizer in a mold continuous-casting machine |
(Eng)
|
|
Stulov V.
|
| Volume 45, Nº 3 (2016) |
Method of product design description using graph properties |
(Eng)
|
|
Bazrov B.
|
| Volume 45, Nº 2 (2016) |
Development of a folded filler model with contact flat faces |
(Eng)
|
|
Alekseev K., Faizullina N.
|
| Volume 45, Nº 2 (2016) |
Analysis and diagnostics of the human cardiovascular system using the principles of nonlinear wave mechanics |
(Eng)
|
|
Ganiev R., Reviznikov D., Rogoza A., Slastushenskii Y., Ukrainskii L.
|
| 1 - 18 de 18 resultados |
|
