Improved Efficiency of the Process of Low-Temperature Plasma Hardening Based on its Monitoring


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

Investigations on the feasibility and development of the monitoring process for the lowtemperature plasma hardening of metal items are carried out. It is shown that it is reasonable to carry out monitoring according to the parameters of the signals registered in the plasma-item-stand-earth electric circuit and analyze it with the help of the value (Hurst exponent) numerically reflecting the main formation regularities and change of the signal structure in the hardening process. Requirements on the monitoring system providing the valid information support of low-temperature plasma hardening are formed. It is deduced from the experiments that the maximum hardened surface layer is formed if the hardening process is accompanied by signal generation with the minimal Hurst exponent values.

作者简介

N. Azikov

Blagonravov Institute of Mechanical Engineering

Email: v_martynov@mail.ru
俄罗斯联邦, Moscow, 101990

B. Brzhozovskii

Saratov State Technical University

Email: v_martynov@mail.ru
俄罗斯联邦, Saratov, 410054

M. Brovkova

Saratov State Technical University

Email: v_martynov@mail.ru
俄罗斯联邦, Saratov, 410054

E. Zinina

Saratov State Technical University

Email: v_martynov@mail.ru
俄罗斯联邦, Saratov, 410054

V. Martynov

Saratov State Technical University

编辑信件的主要联系方式.
Email: v_martynov@mail.ru
俄罗斯联邦, Saratov, 410054

A. Susskii

Saratov State Technical University

Email: v_martynov@mail.ru
俄罗斯联邦, Saratov, 410054

补充文件

附件文件
动作
1. JATS XML

版权所有 © Allerton Press, Inc., 2017