On the Effect of the Surface State and Geometry of the Discharge- Chamber Edges and Sizes of Morozov’s Stationary Plasma Thruster upon its Long-Term Operation

Аннотация

The results of long-term tests of Morozov’s stationary plasma thrusters are presented. It is revealed how the surface state and geometry of the discharge chamber’s edges influence the thruster’s parameters. It is shown that, during the ground tests of thrusters with cylindrical geometry of the acceleration channel under initial stage of operation, material sputtered from the discharge chambers’ walls is deposited onto the nearanode segment of the walls. Films of deposited material fail during thruster operation causing fragment formation, which jut out towards the discharge volume and disturb the motion of drifting electrons in the area of their acceleration. As a result the thruster reactive force and specific impulse decrease. The way in which the forming fragments influence thruster performance and operation is examined. It is shown that it decreases under long-term operation and significant channel widening since the ion flux to the wall and the quantity of the sputtered material decrease, and since the profile of the walls changes due to their wear and cleaning effect of the discharge. As a result the thruster’s parameters are restored to a level close to the initial one. It is shown that the dynamics of thruster parameters variation in space and during ground tests is different. This means that it is necessary to simulate more properly the conditions of thruster operation in space when conducting ground development tests. Thrusters with a long lifetime should be designed with widening of the acceleration channel beyond the loop which surrounds the magnetic system so that areas of acceleration and the erosion of walls are located in the widened part of the channel.