Structural phase states and properties of the layer surfaced on low-carbon steel with Fe‒C‒Cr‒Nb‒W powder-core wire followed by electron-beam processing

Resumo

Structural phase states and tribological properties of the coating surfaced onto Hardox 450 martensite low-carbon steel with powder wire Fe‒C‒Cr‒Nb‒W and modified by subsequent electron-beam processing are studied by methods of modern physical material science. It is shown that irradiation of ~5 thick surfaced layer with high intensity pulsed electron beams results in the formation of ~20 μm thick surface layer with the master phases of α-Fe and NbC, Fe₃C and M₆C(Fe₃W₃C) carbides. The main difference of the surface layer modified with electron-beam processing from the unmodified volume of the surfacing is the morphology and dimensions of the second phase inclusions. In the modified layer of the surfacing the inclusions have smaller dimensions and are located in the form of interlayers along the grain boundaries. In unmodified surfacing the particles of the faceted shape located chaotically in the grain volume are the basic morphological type of the inclusions. It is noted that the small value of crystal lattice Nb parameter observed in the experiment may be caused by the high level of vacant interstitial sites having the smaller size in comparison with the occupied interstitial sites. It is established that wear resistance of the surfaced layer after electron-beam processing increases more than 70-fold relative to wear resistance of Hardox 450 steel and friction coefficient decreases significantly (~3-fold).