Viscoplastic Flow in the Material of a Cylindrical Layer Suspended on a Rigid Shaft under the Conditions of Its Variable Rotation

S. V. Firsov; Фирсов С. В.

doi:10.31857/S0572329922600359

Viscoplastic Flow in the Material of a Cylindrical Layer Suspended on a Rigid Shaft under the Conditions of Its Variable Rotation

Авторлар: Firsov S.¹
Мекемелер:
1. Institute of Mechanical Engineering and Metallurgy of the Far East Branch of the Russian Academy of Sciences
Шығарылым: № 2 (2023)
Беттер: 136-146
Бөлім: Articles
URL: https://journals.rcsi.science/1026-3519/article/view/137512
DOI: https://doi.org/10.31857/S0572329922600359
EDN: https://elibrary.ru/DFVULC
ID: 137512

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Тек жазылушылар үшін

Аннотация
Авторлар туралы
Әдебиет тізімі
Қосымша файлдар
Статистика

Аннотация

The development of viscoplastic flow in the material of a cylindrical layer placed on a rigid cylindrical shaft and rotating with it around their common axis is calculated. Depending on the increasing speed of rotation up to the maximum, the place and time points of the beginning of the viscoplastic flow, the patterns of propagation of the flow area, the changing strains and stresses in the deformable material are determined. As a condition for viscoplastic flow, the corresponding generalization of the condition for maximum octahedral stresses is taken. For the purposes of testing the calculation programs, an exact solution of the problem of a steady viscoplastic flow of a material during rotation of a compound cylinder at a constant speed has been obtained.

Негізгі сөздер

elasticity, viscoplasticity, rotating cylinder, deformation due to inertial forces

Авторлар туралы

S. Firsov

Institute of Mechanical Engineering and Metallurgy of the Far East Branch of the Russian Academy of Sciences

Хат алмасуға жауапты Автор.
Email: firsov.s.new@yandex.ru
Komsomolsk-na-Amure, 681005 Russia

Әдебиет тізімі

Работнов Ю.Н. Ползучесть элементов конструкций. М.: Наука, 2014. 752 p.
Nadai A. Theory of Flow and Fracture of Solids. McGraw Hill, 1950. 572 p.
Gamer U., Sayir M. Elastic-plastic stress distribution in a rotating solid shaft // ZAMP. 1984. V. 35. № 5. P. 601–617. https://doi.org/10.1007/BF00952107
Mack W. The rotating elastic-plastic solid shaft with free ends // Tech. Mech. 1991. № 12. P. 119–124.
Mack W. Rotating elastic-plastic tube with free ends // Int. J. Solids Struct. 1991. V. 27. № 11. P. 1461–1476. https://doi.org/10.1016/0020-7683(91)90042-E
Gamer U., Mack W., Varga I. Rotating elastic-plastic solid shaft with fixed ends // Int. J. Eng. Sci. 1997. V. 35. № 3. P. 253–267. https://doi.org/10.1016/S0020-7225(96)00085-7
Прокудин А.Н., Фирсов С.В. Вязкопластическое течение вращающегося полого цилиндра // Дальневосточный математический журнал. 2018. V. 18. № 2. P. 242–260.
Прокудин А.Н., Буренин А.А. Упругопластическое деформирование вращающегося сплошного цилиндра из линейно-упрочняющегося материала // ПММ. 2021. V. 85. № 2. P. 172–192. https://doi.org/10.31857/S0032823521020077
Прокудин А.Н., Буренин А.А. Анализ упругопластического деформирования вращающегося сплошного цилиндра при общем кусочно-линейном условии пластичности // ПМТФ. 2021. V. 62. № 5 (369). P. 68–79. https://doi.org/10.15372/PMTF20210507
Begun A.S., Burenin A.A., Kovtanyuk L.V., Prokudin A.N. Irreversible deformation of a rotating disk having angular acceleration // Acta Mech. 2021. V. 232. № 5. P. 1917–1931. https://doi.org/10.1007/s00707-021-02942-5
Firsov S.V., Prokudin A.N., Burenin A.A. Creep and plastic flow in a rotating cylinder with a rigid inclusion // J. Appl. Industr. Math. 2019. V. 13. № 4. P. 642–652. https://doi.org/10.1134/S199047891904001X
Быковцев Г.И., Ивлев Д.Д. Теория пластичности. Владивосток: Дальнаука, 1998. 528 p.
Мосолов П.П., Мясников В.П. Механика жесткопластических сред. М.: Наука, 1988. 208 p.
Ковтанюк Л.В., Шитиков А.В. О теории больших упругопластических деформаций материалов при учете температурных и реологических эффектов // Вестник ДВО РАН. 2006. № 4. P. 87–93.