Auxetics among Two-Layered Composites Made of Cubic Crystals. Analytical and Numerical Analysis

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The results of calculations of the effective Young's modulus of longitudinally stretched twolayered plates made of identically oriented cubic crystals are presented on the basis of analytical analysis and the numerical finite element method. Analytical dependences of effective Young's modulus on Young's moduli and Poisson's ratios of crystals in layers are presented. Combinations of pairs of crystals with a significant deviation of the effective characteristics from ones found by the rule of mixtures are determined. The dependences of the effective Young's moduli on extreme values of the Young's moduli and Poisson's ratios of crystals in layers are established. They are presented graphically, and in some cases are reflected in the form of a table.

Sobre autores

A. Demin

Ishlinsky Institute for Problems in Mechanics RAS

Email: lisovenk@ipmnet.ru
Moscow, 119526 Russia

M. Volkov

Ishlinsky Institute for Problems in Mechanics RAS

Email: volkovmikhl@ipmnet.ru
Moscow, 119526 Russia

V. Gorodtsov

Ishlinsky Institute for Problems in Mechanics RAS

Email: lisovenk@ipmnet.ru
Moscow, 119526 Russia

D. Lisovenko

Ishlinsky Institute for Problems in Mechanics RAS

Autor responsável pela correspondência
Email: lisovenk@ipmnet.ru
Moscow, 119526 Russia

Bibliografia

  1. Зубов В.Г., Фирсова М.М. Об особенностях упругого поведения кварца в области α–β-перехода // Кристаллография. 1962. Т. 7. № 3. С. 469–471.
  2. Garber A.M. Pyrolytic materials for thermal protection systems // Aerospace Eng. 1963. V. 22. P. 126–137.
  3. Поперека М.Я., Балагуров В.Г. Ферромагнитные пленки с отрицательным коэффициентом Пуассона // ФТТ. 1969. Т. 11. № 12. С. 2507–3513.
  4. Gunton D.J., Saunders G.A. Stability limits on the Poisson ratio: application to a martensitic transformation // Proc. R. Soc. Lond. Ser. A. 1975. V. 343. № 1632. P. 63–83. https://doi.org/10.1098/rspa.1975.0052
  5. Milstein F., Huang K. Existence of a negative Poisson ratio in fcc crystals // Phys. Rev. B. 1979. V. 19. № 4. P. 2030–2033. https://doi.org/10.1103/PhysRevB.19.2030
  6. Lakes R.S. Foam structures with a negative Poisson’s ratio // Science. 1987. V. 235. № 4792. P. 1038–1040. https://doi.org/10.1126/science.235.4792.1038
  7. Fies F.A., Lakes R.S., Park J.B. Negative Poisson’s ratio polymeric and metallic foams // J. Mater. Sci. 1988. V. 23. № 12. P. 4406–4414. https://doi.org/10.1007/BF00551939
  8. Светлов И.Л., Епишин А.И., Кривко А.И. и др. Анизотропия коэффициента Пуассона монокристаллов никелевого сплава // ДАН СССР. 1988. Т. 302. № 6. С. 1372–1375.
  9. Caddock B.D., Evans K.E. Microporous materials with negative Poisson’s ratios. 1. Microstructure and mechanical properties // J. Phys. D. 1989. V. 22. № 22. P.1877–1882. https://doi.org/10.1088/0022-3727/22/12/012
  10. Alderson K.L., Evans K.E. The fabrication of microporous polyethylene having a negative Poisson’s ratio // Polymer 1992. V. 33. № 20. P. 4435–4438. https://doi.org/10.1016/0032-3861(92)90294-7
  11. Yeganeh-Haeri A., Weidner D.J., Parisc J.B. Elasticity of -cristobalite: a silicon dioxide with a negative Poisson’s ratio // Science. 1992. V. 257. № 5070. P. 650–652. https://doi.org/10.1126/science.257.5070.65010.1126/science.257.5070.650
  12. Choi J.B., Lakes R.S. Non-linear polymer properties of polymer cellular materials with a negative Poisson’s ratio // J. Mater. Sci. 1992. V. 27. № 17. P. 4678–4684. https://doi.org/10.1007/BF01166005
  13. Scharer U., Wachter P. Negative elastic constants in intermediate valent SmxLa1 – xS // Solid State Commun. 1995. V. 96. № 17. P. 497–501. https://doi.org/10.1016/0038-1098(95)00418-1
  14. Prall D., Lakes R.S. Properties of a chiral honeycomb with a Poisson’s ratio of –1 // Int. J. Mech. Sci. 1997. V. 39. № 3. P. 305–314. https://doi.org/10.1016/S0020-7403(96)00025-2
  15. Baughman R.H., Shacklette J.M., Zakhidov A.A., Stafström S. Negative Poisson’s ratios as a common feature of cubic metals // Nature. 1998. V. 392. № 6674. P. 362–363. https://doi.org/10.1038/32842
  16. Lim T.-C. Auxetic Materials and Structures. Singapore: Springer, 2015. http: //dx.doi.org/https://doi.org/10.1007/978-981-287-275-3
  17. Sanami M. Auxetic materials for biomedical applications // Thesis for the degree of Doctor of Philosophy. 2015. P. 1–252.
  18. Bhular S.K. Three decades of auxetic polymers. Review // e-Polymers. 2015. V. 15. № 4. P. 205–215. https://doi.org/10.1515/epoly-2014-0193
  19. Hou X., Silberschmidt V.V. Metamaterials with negative Poisson’s ratio. A review of mechanical properties and deformation mechanisms // In: Silberschmidt V., Matveenko V. (eds) Mechanics of Advanced Materials. Engineering Materials. Springer, Cham. 2015. P. 155–179. https://doi.org/10.1007/978-3-319-17118-0_7
  20. Hu H., Zulifgar A. Auxetic textile materials – A review // J. Textile Eng. Fashion Technolog. 2016. V. 1. № 1. P. 00001. https://doi.org/10.15406/jteft.2017.01.00002
  21. Saxena K.K., Das R., Calius E.P. Three Decades of Auxetics Research-Materials with Negative Poisson’s Ratio: A Review // Adv. Eng. Mater. 2016. V. 18. № 11. P. 1847–1870. https://doi.org/10.1002/adem.201600053
  22. Jiang J.-W., Kim S.Y., Park H.S. Auxetic Nanomaterials: Recent Progress and Future Development, Appl. Phys. Rev., 2016. V. 3. № 4. P. 041101. https://doi.org/10.1063/1.4964479
  23. Novak N., Vesenjak M., Ren Z. Auxetic cellular materials-a review // Strojniški vestnik - Journal of Mechanical Engineering. 2016. V. 62. № 9. P. 485–493. https://doi.org/10.5545/sv-jme.2016.3656
  24. Kolken H.M.A., Zadpoor A.A. Auxetic Mechanical Metamaterials // RSC Adv. 2017. V. 7. № 9. P. 5111–5129. https://doi.org/10.1039/C6RA27333E
  25. Lakes R.S. Negative-Poisson’s-ratio materials: auxetic solids //Ann. Rev. Mater. Res. 2017. V. 47. P. 63–81. https://doi.org/10.1146/annurev-matsci-070616-124118
  26. Ma P., Chang Y., Boakae A., Jiang G. Review on the knitted structures with auxetic effect // J. Textile Inst. 2017. V. 108. № 6. P. 947–961. https://doi.org/10.1080/00405000.2016.1204901
  27. Lim T.-C. Analogies across auxetic models based on deformation mechanism // Phys. Status Solidi (RRL). 2017. T. 11. № 6. P. 1600440. https://doi.org/10.1002/pssr.201770330
  28. Duncan O., Shepherd T., Moroney C. et al. Review of Auxetic Materials for Sports Applications: Expanding Options in Comfort and Protection // Appl. Sci. 2018. V. 8. № 6. P. 941. https://doi.org/10.3390/app8060941
  29. Ren X., Das R., Tran P. et al. Auxetic Metamaterials and Structures: A Review // Smart Mater. Struct. 2018. V. 27. № 2. P. 023001. https://doi.org/10.1088/1361-665X/aaa61c
  30. Gunel O., Ranjbar M. Review of auxetic materials // 1-st International Conference on Advances in Mechanical and Mechatronics Engineering “ICAMMEN-2018”. 10 p.
  31. Yu X., Zhou J., Liang H., Jiang Z., Wu L. Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review // Progr. Mater. Sci. 2018. V. 94. P. 114–175. https://doi.org/10.1016/j.pmatsci.2017.12.003
  32. Hosseinkhani A., Yjunesian D., Ranjbar M. A short review on vibro-acoustic behavior of auxetic two-dimensional structures // 1-st International Conference on Advances in Mechanical and Mechatronics Engineering “ICAMMEN-2018”. 2018. 9 p.
  33. Duffy T.S. Single-crystal elastic properties of minerals and related materials with cubic symmetry// Amer. Mineralog. 2018. V. 103. № 6. P. 977–988. https://doi.org/10.2138/am-2018-6285
  34. Peng R., Ma Y., Wu Q., Huang B., Dai Y. Two-dimensional materials with intrinsic auxeticity: Progress and perspectives // Nanoscale. 2019. V. 11. № 24. P. 1413–1428. https://doi.org/10.1039/C9NR03546J
  35. Wu W., Hu W., Qian G. et al. Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review // Mater. Des. 2019. V. 180. P. 107950. https://doi.org/10.1016/j.matdes.2019.107950
  36. Yoo S., Park Q.-H. Metamaterials and chiral sensing: A review of fundamentals and applications // Nanophotonics. 2019. V. 8. № 2. P. 249–261. https://doi.org/10.1515/nanoph-2018-0167
  37. Sayed U., Samarth A. Auxetic polymers in textiles. Review // Int. J. Adv. Sci. Eng. 2019. V. 5. № 3. P. 1056–1063. https://doi.org/10.29294/IJASE.5.3.2019.1056-1063
  38. Lim T.-C. Mechanics of Metamaterials with Negative Parameters. Singapore: Springer. 2020.
  39. Kelkar P.U., Kim H.S., Cho K.-H. et al. Cellular Auxetic Structures for Mechanical Metamaterials: A Review // Sensors. 2020. V. 20. № 11. P. 3132. https://doi.org/10.3390/s20113132
  40. Mardling P., Alderson A., Jordan-Mahy N., Le Maitre C. The use of auxetic materials in tissue engineering // Biomater. Sci. 2020. V. 8. № 8. P. 2074–2983. https://doi.org/10.1039/C9BM01928F
  41. Zang J., Lu G., You Z. Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review // Compos. B. Engineering. 2020. V. 201. P. 108340. https://doi.org/10.1016/j.compositesb.2020.108340
  42. Wang P., Luan C., Liao G. et al. Progress in auxetic mechanical metamaterials: structures, characteristics, manufacturing methods and applications // Adv. Eng. Mater. 2020. V. 22. № 10. P. 2000312. https://doi.org/10.1002/adem.202000312
  43. Dugad R., Radhakrishna G., Gandhi A. Recent advancements in manufacturing technologies of microcellular polymers. A review // J. Polymer Res. 2020. V. 27. № 7. P. 1–23.
  44. Tang H., Jiang X., Ling L. et al. Highly tailorable electromechanical properties of auxetic piezoelectric ceramics with ultra-low porosity // J. Americ. Ceramic Soc. 2020. V. 103. № 11. P. 6330–6347. https://doi.org/10.1111/jace.17356
  45. Joseph A., Manesh V., Harursampath D. On the application of additive manufacturing methods for auxetic structures: A review // Adv. Manuf. 2021. V. 9. № 3. P. 342–368. https://doi.org/10.1007/s40436-021-00357-y
  46. Luo C., Han C.Z., Ren X. et al. Design, manufacturing and applications of auxetic tubular structures. A review // Thin-Walled Struct. 2021. V. 163. P. 107682. https://doi.org/10.1016/j.tws.2021.107682
  47. Francisco M.B., Pereira J.L.J., Oliver G.A. et. al. A review on the energy absorption response and structural applications of auxetic structures // Mech. Adv. Mater. Struct. 2021. P. 1–20. https://doi.org/10.1080/15376494.2021.1966143
  48. Raistrick T., Zhang Z., Mistry D. et al. Understanding the physics of the auxetic response in a liquid crystal elastomer // Phys. Rev. Res. 2021. V. 3 № 2. P. 023191. https://doi.org/10.1103/PhysRevResearch.3.023191
  49. Chang Y., Hu H. 3D fabrics with negative Poisson’s ratio. A review // Appl. Compos. Mater. 2021. № 1. P. 1–14. https://doi.org/10.1007/s10443-021-09931-w
  50. Cardoso J.O., Borges J.P., Velhinho A. Structural metamaterials with negative mechanical-thermomechanical indices. A review // Progr. Natur. Sci. Mater. Int. 2021. V. 31. № 6. P. 801–808. https://doi.org/10.1016/j.pnsc.2021.10.015
  51. Kim M.K., Kim S., Yun J.W. et al. Design and manufacturing of mechanical metamaterials. A review. Compos. Res. 2021. V. 34. № 4. P. 199–211. https://doi.org/10.7234/composres.2021.34.4.199
  52. Alomarah A. Mechanical properties novel auxetic structures // Thesis for the degree of Doctor of Philosophy. 2021. P. 1–290.
  53. Hayes M.A., Shuvalov A. On the extreme values of Young’s modulus, the shear modulus, and Poisson’s ratio for cubic materials // J. Appl. Mech. 1998. V. 65. № 3. P. 786–787. https://doi.org/10.1115/1.2789130
  54. Lubarda V.A., Meyers M.A. On the negative Poisson ratio in monocrystalline zinc // Scr. Mater. 1999. V. 40. P. 975–977. https://doi.org/10.1016/S1359-6462(99)00039-1
  55. Paczkiewicz T., Pruchnik M., Wolski S. Slowness surfaces and energy focusing patterns of auxetic cubic media // Comput. Meth. Sci. Technol. 2004. V. 10. № 2. P. 183–195. https://doi.org/10.12921/cmst.2004.10.02.183-195
  56. Tokmakova S.P. Stereographic projections of Poisson’s ratio in auxetic crystals // Phys. Status Solidi B. 2005. V. 242. № 3. P. 721–729. https://doi.org/10.1002/pssb.200460389
  57. Norris A.N. Poisson’s ratio in cubic materials // Proc. R. Soc. A. 2006. V. 462. № 2075. P. 3385–3405. https://doi.org/10.1098/rspa.2006.1726
  58. Paczkiewicz T., Wolski S. Anisotropic properties of mechanical characteristics and auxeticity of cubic crystalline media // Phys. Status Solidi B. 2007. V. 344. № 3. P. 966–977. https://doi.org/10.1002/pssb.200572715
  59. Paczkiewicz T., Wolski S. Elastic properties of cubic crystals: Every’s versus Blackman’s diagram // J. Phys. Conf. Ser. 2008. V. 104. P. 012038. https://doi.org/10.1088/1742-6596/104/1/012038
  60. Branka A.C., Wojciechowski K.W. Auxeticity of cubic materials. The role of repulsive core interaction // J. Non-Cryst. Solids. 2008. V. 354. P. 4143–4145. https://doi.org/10.1016/j.jnoncrysol.2008.06.088
  61. Branka A.C., Heyes D.M., Wojciechowski K.W. Auxeticity of cubic materials // Phys. Status Solidi B. 2009. V. 246. № 9. P. 2063–2071. https://doi.org/10.1002/pssb.200982037
  62. Hughes T.P., Marmier A., Evans K.E. Auxetic frameworks inspired by cubic crystals // Int. J. Solids Struct. 2010. V. 47. № 11–12. P. 1469–1476. https://doi.org/10.1016/j.ijsolstr.2010.02.002
  63. Branka A.C., Heyes D.M., Wojciechowski K.W. Auxeticity of cubic materials under pressure // Phys. Status Solidi B. 2011. V. 248. № 1. P. 96–104. https://doi.org/10.1002/pssb.201083981
  64. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С. Кубические ауксетики // Докл. АН 2011. Т. 439. № 2. С.184–187.
  65. Лисовенко Д.С., Городцов В.А. Кубические кристаллы с отрицательными коэффициентами Пуассона (кубические ауксетики) // Вестник Нижегородского университета им. Н.И. Лобачевского 2011. № 4 (2). С. 488–489.
  66. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С. Модуль Юнга кубических ауксетиков // Письма о материалах 2011. Т. 1. В. 3. С. 127–132. https://doi.org/10.22226/2410-3535-2011-3-127-132
  67. Branka A.C., Heyes D.M., Mackowiak Sz., et al. Cubic materials in different auxetic regions: Linking microscopic to macroscopic formulations // Phys. Status Solidi B. 2012. V. 247. № 7. P. 1373–1378. https://doi.org/10.1002/pssb.201084222
  68. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С. Модуль сдвига кубических кристаллов // Письма о материалах 2012. Т. 2. № 1. С. 21–24. https://doi.org/10.22226/2410-3535-2012-1-21-24
  69. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С. Связь среднего коэффициента Пуассона с модулем Юнга для кубических кристаллов. Ауксетики в среднем // Докл. АН. 2012. Т. 443. № 6. С. 677–681.
  70. Paes V.Z.C., Mosca D.H. Magnetostrictive contribution to Poisson ratio of galfenol // J. Appl. Phys. 2013. V. 114. № 12. P. 123915. https://doi.org/10.1063/1.4822169
  71. Tretiakov K.V., Wojciechowski K.W. Elastic properties of fcc crystals of polydisperse soft spheres // Phys. Status Solidi B. 2013. V. 250. № 10. P. 2020–2029. https://doi.org/10.1002/pssb.201384236
  72. Goldstein R.V., Gorodtsov V.A., Lisovenko D.S. Classification of cubic auxetics // Phys. Status Solidi B. 2013. V. 250. № 10. P. 2038–2043. https://doi.org/10.1002/pssb.201384233
  73. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С., Волков М.А. Отрицательный коэффициент Пуассона для кубических кристаллов и нано/микротрубок // Физ. Мезомех. 2013. Т. 16. № 6. С. 13–31.
  74. Tretiakov K.V., Wojciechowski K.W. Partially auxetic behavior in fcc crystals of hard-core repulsive Yukawa particles // Phys. Status Solidi B. 2014. V. 251. № 2. P. 383–387. https://doi.org/10.1002/pssb.201384244
  75. Krasavin V.V., Krasavin A.V. Auxetc properties of cubic metal single crystals // Phys. Status Solidi B. 2014. V. 251. № 11. P. 2314–2320. https://doi.org/10.1002/pssb.201451129
  76. Ho D.T., Park S.D., Kwon S.Y., Park K., Kim S.Y. Negative Poisson’s ratios in metal nanoplates // Nat. Commun. 2014. V. 5. № 1. P. 3255. https://doi.org/10.1038/ncomms4255
  77. Ho D.T. Mechanical response and elastic instability of cubic bulk and nanoscale materials // Thesis for the degree of Doctor of Philosophy. 2015. P. 1–232.
  78. Ho D.T., Kim H., Kwon S.Y., Kim S.Y. Auxeticity of face-centered cubic metal (001) nanoplates // Phys. Status Solidi B. 2015. V. 252. № 11. P.1492–1501.
  79. Ерофеев В.И., Павлов И.С. Параметрическая идентификация кристаллов, имеющих кубическую решетку, с отрицательными коэффициентами Пуассона // Прикл. Мех. Техн. Физ. 2015. Т. 56. № 6. С. 94–101. https://doi.org/10.15372/PMTF20150611
  80. Raghunas G., Flatan A.B. Study of magnetic domain evolution in an auxetic plane of Galfenol using Kerr microscopy // J. Appl. Phys. 2015. T. 117. № 17. C. 17E704. https://doi.org/10.1063/1.4913727
  81. Ho D.T., Park S.D., Kwon S.Y., Han T.S., Kim S.Y. Negative Poisson’s ratio in cubic materials along principal directions // Phys. Status Solidi B. 2016. V. 253. № 7. P. 1288–1294. https://doi.org/10.1002/pssb.201600017
  82. Ho D.T., Kwon S.Y., Kim S.Y. Metal [100] nanowires with negative Poisson’s ratio // Sci. Reports 2016. V. 6. № 1. P. 27560. https://doi.org/10.1038/srep27560
  83. Cabras L., Brun M. A class of auxetic three-dimensional lattices // J. Mech. Phys. Solids. 2016. V. 91. P. 56–72. https://doi.org/10.1016/j.jmps.2016.02.010
  84. Lisovenko D.S., Baimova J.A., Rysaeva L.Kh., Gorodtsov V.A., Rudskoy A.I., Dmitriev S.V. Equilibrium diamond-like carbon nanostructures with cubic anisotropy: elastic properties // Phys. Status Solidi B. 2016. V. 253. № 7. P. 1303–1309. https://doi.org/10.1002/pssb.201600049
  85. Епишин А.И., Лисовенко Д.С. Экстремальные значения коэффициента Пуассона кубических кристаллов // Ж. Техн. физ. 2016. Т. 16. № 10. С.1516–1524. http://journals.ioffe.ru/articles/43675
  86. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С., Волков М.А. Двухслойные трубки из кубических кристаллов // Докл. АН 2016. Т. 471. № 4. С. 414–420. https://doi.org/10.7868/S0869565216340077
  87. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С. Кручение цилиндрически-анизотропных нано/микротрубок из кубических материалов, полученных сворачиванием кристаллографических плоскостей (011) // Письма о материалах. 2016. Т. 6. № 4. С. 249–252. https://doi.org/10.22226/2410-3535-2016-4-249-252
  88. Goldstein R.V., Gorodtsov V.A., Lisovenko D.S., Volkov M.A. Two-layered tubes from cubic crystals: auxetic tubes // Phys. Status Solidi B. 2017. V. 254. № 12. P. 1600815. https://doi.org/10.1002/pssb.201600815
  89. Pigłowski P.M., Narojczyk J.W., Wojciechowski K.W., Tretiakov K.V. Auxeticity enhancement due to size polydispersity in fcc crystals of hard-core repulsive Yukawa particles // Soft Matter. 2017. V. 13. № 43. P. 7916–7921. https://doi.org/10.1039/C7SM01231D
  90. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С., Волков М.А. Тонкие однородные двуслойные пластины из кубических кристаллов с различной ориентацией слоев // Физ. Мезомех. 2018. Т. 21. № 2. С. 5–13. https://doi.org/10.24411/1683-805X-2018-12001
  91. Gorodtsov V.A., Lisovenko D.S., Lim T.-C. Three-layered plate exhibiting auxeticity based on stretching and bending modes // Compos. Struct. 2018. V. 194. P. 643–651. https://doi.org/10.1016/j.compstruct.2018.03.092
  92. Narojczyk J.W., Wojciechowski K.W. Poisson’s ratio of the fcc hard sphere crystals with periodically stacked (001)-nanolayers of hard spheres of another diameter // Materials. 2019. V. 12. № 5. P. 700. https://doi.org/10.3390/ma12050700
  93. Ho D.T., Nguyen C.T., Kwon S.Y., Kim S.Y. Auxeticity in metals and periodic metallic porous structures induced by elastic instabilities // Phys. Status Solidi B. 2019. V. 256. № 1. P. 1800122. https://doi.org/10.1002/pssb.201800122
  94. Bryukhanov I.A., Gorodtsov V.A., Lisovenko D.S. Chiral Fe nanotubes with both negative Poisson’s ratio and Poynting’s effect. Atomistic simulation // J. Phys.: Condens. Matter. 2019. V. 31. № 47. P. 475304. https://doi.org/10.1088/1361-648X/ab3a04
  95. Брюханов И.А., Городцов В.А., Лисовенко Д.С. Атомистическое моделирование механических свойств хиральных металлических нанотрубок // Физ. Мезомех. 2019. Т. 22. № 6. С. 48–57. https://doi.org/10.24411/1683-805X-2019-16005
  96. Городцов В.А., Лисовенко Д.С. Ауксетики среди материалов с кубической анизотропией // Изв. РАН. МТТ. 2020. № 4. С. 7–24. https://doi.org/10.31857/S0572329920040054
  97. Tretiakov K.V., Wojciechowski K.W. The influence of the soft Yukawa potential and hard core interactions on auxeticity of the face centered cubic crystal of hard-core repulsive Yukawa particles // Phys. Status Solidi B. 2020. V. 257. № 10. P. 2000194. https://doi.org/10.1002/pssb.202000194
  98. Брюханов И.А., Волков М.А., Городцов В.А., Лисовенко Д.С. Об упругих свойствах хиральных металлических нанотрубок из кубических кристаллов // Физ. Мезомех. 2021. Т. 24. № 1. С. 37–49. https://doi.org/10.24411/1683-805X-2021-11003
  99. Volkov M.A., Gorodtsov V.A., Fadeev E.P., Lisovenko D.S. Stretching of chiral tubes obtained by rolling-up plates of cubic crystals with various orientations // J. Mech. Mater. Struct. 2021. V. 16. № 2. P. 139–157. https://doi.org/10.2140/jomms.2021.16.139
  100. Gorodtsov V.A., Volkov M.A., Lisovenko D.S. Out-of-plane tension of thin two-layered plates of cubic crystals // Phys. Status Solidi B. 2021. V. 258. № 12. P. 2100184. https://doi.org/10.1002/pssb.202100184
  101. Narojczyk J.W., Wojciechowski K.W., Smardzewski J., Imre A.R., Grima J.N., Bilski M. Cancellation of auxetic properties in F.C.C. hard sphere crystals by hybrid layer-channel nanoinclusions filled by hard spheres of another diameter // Materials. 2021. V. 14. № 11. P. 3008. https://doi.org/10.3390/ma14113008
  102. Narojczyk J.W., Bilski M., Grima J.N., Kędziora P., Morozow D., Rucki M., Wojciechowski K.W. Removing auxetic properties in fcc hard sphere crystals by orthogonal nanochannels with hard spheres of another diameter // Materials. 2022. V. 15. № 3. P. 1134. https://doi.org/10.3390/ma15031134
  103. Narojczyk J.W., Tretiakov K.V., Wojciechowski K.W. Partially auxetic properties of fcc hard sphere crystals with nanochannels of different sizes, parallel to [001]-direction and filled by other hard spheres // Phys. Status Solidi B. 2022. V. 259. № 6. P. 2200006. https://doi.org/10.1002/pssb.202200006
  104. Епишин А.И., Лисовенко Д.С. Влияние кристаллической структуры и типа межатомной связи на упругие свойства одноатомных и двухатомных кубических кристаллов // Изв. РАН. МТТ. 2022. № 6. С. 79–96. https://doi.org/10.31857/S0572329922060058
  105. Goldstein R.V., Gorodtsov V.A., Lisovenko D.S. Longitudinal elastic tension of two-layered plates from isotropic auxetics-nonauxetics and cubic crystals // Eur. J. Mech. A Solids. 2017. V. 63. P. 122–127. https://doi.org/10.1016/j.euromechsol.2017.01.001
  106. Every A.G., McCurdy A.K. Second and higher order elastic constants. Nelson D.E. (editor) // Landolt-Börnstein. New Ser. Group III. Springer, 1992. V. 29a. https://doi.org/10.1007/b44185
  107. Schärer U., Jung A., Wachter P. Brillouin spectroscopy with surface acoustic waves on intermediate valent, doped SmS // Phys. B. 1998. V. 244. P. 148–153. https://doi.org/10.1016/S0921-4526(97)00478-X
  108. Сиротин Ю.И., Шаскольская М.П. Основы кристаллофизики // М.: Наука 1975. 680 с.
  109. Гольдштейн Р.В., Городцов В.А., Лисовенко Д.С. Связь среднего коэффициента Пуассона с модулем Юнга для кубических кристаллов. Ауксетики в среднем // Докл. АН 2012. Т. 443. № 6. С. 677–681.

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar
2.

Baixar (20KB)
Metadados
3.

Baixar (387KB)
Metadados
4.

Baixar (159KB)
Metadados
5.

Baixar (89KB)
Metadados
6.

Baixar (226KB)
Metadados
7.

Baixar (104KB)
Metadados

Declaração de direitos autorais © А.И. Демин, М.А. Волков, В.А. Городцов, Д.С. Лисовенко, 2023

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies