Issue |
Title |
File |
Vol 49, No 11 (2019) |
Diagnostic Evaluation Sequence of the Technical State of Rolling-Mill Pinion Stands (Report 2) |
 (Eng)
|
Sidorov V.A.
|
Vol 49, No 11 (2019) |
Wear-Resistance Increase of Friction Surfaces of Steel Machine Parts by Electro-Mechanical Hardening |
 (Eng)
|
Gorlenko A.O., Davydov S.V., Shevtsov M.Y., Boldyrev D.A.
|
Vol 49, No 11 (2019) |
A Growth Kinetics Study and Simulation for Recrystallized Ferrite Grains under the Annealing of Automotive Steel Cold-Rolled Sheets |
 (Eng)
|
Vasilyev A.A., Sokolov S.F., Zhitelev P.S., Sokolov D.F., Kolbasnikov N.G.
|
Vol 49, No 10 (2019) |
Fatigue Resistance Changes of Structural Steels at Different Load Spectra |
 (Eng)
|
Myl’nikov V.V., Shetulov D.I., Kondrashkin O.B., Chernyshov E.A., Pronin A.I.
|
Vol 49, No 10 (2019) |
Temperature Field Calculation at Incomplete Hot Processing of Metal Alloys |
 (Eng)
|
Zhuravlev G.M., Romanenko D.N., Gvozdev A.E., Gubanov O.M., Kutepov S.N.
|
Vol 49, No 10 (2019) |
Research of the Microstructure of Fe30Cu70 Alloy Obtained by Different Technologies |
 (Eng)
|
Filonov M.R., Sanin V.V., Dzidziguri E.L., Anikin Y.A., Kostitsina E.V.
|
Vol 49, No 10 (2019) |
Surface Finish Enhancement of Hot-Rolled Strips on the 2000 Wide-Strip Rolling Mill Using Mathematical Modeling at Novolipetsk Steel |
 (Eng)
|
Pimenov V.A., Dagman A.I., Pogodaev A.K., Kovalev D.A., Zhovnodii N.N.
|
Vol 49, No 10 (2019) |
Numerical Simulation of Metal Filling into a CCM Mold Equipped with a Deflector |
 (Eng)
|
Odinokov V.I., Evstigneev A.I., Dmitriev E.A.
|
Vol 49, No 10 (2019) |
Metal Forming Study during Pipe Reduction on Three-High Rolling Mills |
 (Eng)
|
Aleshchenko A.S., Budnikov A.S., Kharitonov E.A.
|
Vol 49, No 10 (2019) |
Physical Properties of CaO–SiO2–B2O3 Slags Containing 15% Al2O3 and 8% MgO |
 (Eng)
|
Babenko A.A., Shartdinov R.R., Upolovnikova A.G., Smetannikov A.N., Gulyakov V.S.
|
Vol 49, No 10 (2019) |
Effect of Electrolytic-Plasma Nitrocarburizing on the Structural and Phase State of Ferrite-Pearlitic Steels |
 (Eng)
|
Popova N.A., Nikonenko E.L., Nikonenko A.V., Gromov V.E., Peregudov O.A.
|
Vol 49, No 10 (2019) |
Changes in Pipe Geometry in the Course of Sequential Creation of Stresses on the Inner Surface under External Thermomechanical Impacts |
 (Eng)
|
Chumanov I.V., Kozlov A.V., Matveeva M.A.
|
Vol 49, No 10 (2019) |
Development of a Steel Temperature Prediction Model in a Steel Ladle and Tundish in a Casting and Rolling Complex |
 (Eng)
|
Botnikov S.A., Khlybov O.S., Kostychev A.N.
|
Vol 49, No 10 (2019) |
Using Cast Iron for Steel Melting in an Electric Arc Furnace |
 (Eng)
|
Bigeev V.A., Stolyarov A.M., Potapova M.V.
|
Vol 49, No 10 (2019) |
Production of Complex Calcium-Containing Ferrous Alloys of Waste Smelter Slags and High-Ash Coals |
 (Eng)
|
Makhambetov E.N., Baisanov A.S., Isagulov A.Z., Grigorovich K.V., Timirbayeva N.R.
|
Vol 49, No 10 (2019) |
Study of Strain and Structural Peculiarities in Different Stages of Two- and Three-High Screw Rolling |
 (Eng)
|
Skripalenko M.M., Romantsev B.A., Galkin S.P., Kaputkina L.M., Skripalenko M.N.
|
Vol 49, No 9 (2019) |
Control of Blast Furnace Filling Based on Cluster Analysis of Burden Surface Temperature |
 (Eng)
|
Ershov E.V., Selyanichev O.L., Lavrukhin A.I.
|
Vol 49, No 9 (2019) |
Vanadium Dispersion Strengthening of Low-Carbon Pipe Steels |
 (Eng)
|
Naumenko V.V., Bagmet O.A., Matrosov M.Y., Khlybov O.S., Kichkina A.A., Dyakonov D.L.
|
Vol 49, No 9 (2019) |
Study of the Structural Condition of Metal in Billet after Deformation in the Continuous-Casting Line |
 (Eng)
|
Smirnov E.N., Smirnov A.N., Sklyar V.A., Mikheev V.V., Belevitin V.A., Orlov G.A., Verzilov A.P.
|
Vol 49, No 9 (2019) |
Formation of Indices of Flatness and of Cross Section Geometry of Hot-Rolled Metal at 2000 Rolling Mill of NLMK |
 (Eng)
|
Dolgov A.V., Faustov V.V., Kudinov S.V.
|
Vol 49, No 9 (2019) |
Fatigue Process in Materials for Automotive Industry |
 (Eng)
|
Pachurin G.V., Goncharova D.A., Philippov A.A., Nuzhdina T.V., Deev V.B.
|
Vol 49, No 9 (2019) |
Calculation of the Thermodynamic Characteristics of Fe–P System by the Molecular Dynamics Method |
 (Eng)
|
Markidonov A.V., Lubyanoi D.A., Kovalenko V.V., Starostenkov M.D.
|
Vol 49, No 9 (2019) |
Molecular–Dynamic Simulation of the Melt of an Industrial Oxide–Fluoride Mold Flux |
 (Eng)
|
Gel’chinskii B.R., Dyul’dina E.V., Leont’ev L.I.
|
Vol 49, No 9 (2019) |
Chemical Reactions in Carbon Gasification Processes |
 (Eng)
|
Berdnikov V.I., Gudim Y.A.
|
Vol 49, No 9 (2019) |
Using an Expander-Generator Unit in the Steel Mill CHP Plant for Producing Electricity and Improving the Efficiency of the Compressor Plant |
 (Eng)
|
Klimenko A.V., Agababov V.S., Koryagin A.V., Petin S.N., Borisova P.N.
|
26 - 50 of 621 Items |
<< < 1 2 3 4 5 6 7 8 9 10 > >>
|