Formation of Indices of Flatness and of Cross Section Geometry of Hot-Rolled Metal at 2000 Rolling Mill of NLMK
- Authors: Dolgov A.V.1, Faustov V.V.1, Kudinov S.V.1
-
Affiliations:
- PAO NLMK (Novolipetsk Metallurgical Works)
- Issue: Vol 49, No 9 (2019)
- Pages: 638-641
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180762
- DOI: https://doi.org/10.3103/S0967091219090031
- ID: 180762
Cite item
Abstract
The geometric indices of both finished rolled metal and its semi-finished products, intended for subsequent treatment, are perhaps the most important from the perspective of the evaluation of the consumer quality of hot-rolled mill products. The survey information is presented, which makes it possible to evaluate the direction of activity and the operating results of engineering and technological personnel of the hot-rolled mill-producing department and related services of NLMK in this direction for the past two decades.
About the authors
A. V. Dolgov
PAO NLMK (Novolipetsk Metallurgical Works)
Author for correspondence.
Email: dolgov_av3@nlmk.com
Russian Federation, Lipetsk, 398040
V. V. Faustov
PAO NLMK (Novolipetsk Metallurgical Works)
Email: dolgov_av3@nlmk.com
Russian Federation, Lipetsk, 398040
S. V. Kudinov
PAO NLMK (Novolipetsk Metallurgical Works)
Email: dolgov_av3@nlmk.com
Russian Federation, Lipetsk, 398040