Mechanical response of amorphous Ni62Nb38 metallic alloy under uniaxial deformation
- 作者: Galimzyanov B.1, Doronina M.1, Mokshin A.1
-
隶属关系:
- Kazan Federal University
- 期: 卷 87, 编号 4 (2023)
- 页面: 573-579
- 栏目: Articles
- URL: https://journals.rcsi.science/0367-6765/article/view/135365
- DOI: https://doi.org/10.31857/S0367676522701022
- EDN: https://elibrary.ru/MCZJND
- ID: 135365
如何引用文章
详细
The mechanical properties of amorphous Ni62Nb38 alloy associated with uniaxial compression and uniaxial tensile are studied at the temperature 300 K based on the large-scale molecular dynamic’s simulations. Stress-strain curves, Young’s modulus, yield strength, and tensile strength are determined for this system. For the first time, some correspondence was found between the values of Young’s modulus and the yield strength, which fits into the experimentally established linear law, which is the same for metallic glasses with different compositions. It is shown that the mechanical and strength properties of amorphous Ni62Nb38 alloy are more pronounced than those of metallic glasses with a different composition.
作者简介
B. Galimzyanov
Kazan Federal University
编辑信件的主要联系方式.
Email: bulatgnmail@gmail.com
Russia, 420008, Kazan
M. Doronina
Kazan Federal University
Email: bulatgnmail@gmail.com
Russia, 420008, Kazan
A. Mokshin
Kazan Federal University
Email: bulatgnmail@gmail.com
Russia, 420008, Kazan
参考
- Schroers J. // Adv. Mater. 2010. V. 22. P. 1566.
- Kruzic J.J. // Adv. Engin. Mater. 2016. V. 18. P. 1308.
- Xiong J., Shi S.-Q., Zhang T.-Y. // Mater. Design. 2020. V. 187. Art. No. 108378.
- Ward L., O’Keeffe S.C., Stevick J. et al. // Acta Mater. 2018. V. 159. P. 102.
- Schuler J.D., Rupert T.J. // Acta Mater. 2017. V. 140. P. 196.
- Galimzyanov B.N., Mokshin A.V. // J. Non-Cryst. Solids. 2021. V. 570. Art. No. 121009.
- Jones M.R., DelRio F.W., Pegues J.W. et al. // J. Mater. Res. 2021. V. 36. P. 3167.
- Xia L., Li W.H., Fang S.S. et al. // J. Appl. Phys. 2006. V. 99. Art. No. 026103.
- Lu W., Tseng J.-C., Feng A. et al. // J. Non-Cryst. Solids. 2021. V. 564. Art. No. 120834.
- Qu R.T., Liu Z.Q., Wang R.F. et al. // J. Alloys Compounds. 2015. V. 637. P. 44.
- Zhang Y., Ashcraft R., Mendelev M.I. et al. // J. Chem. Phys. 2016. V. 145. Art. No. 204505.
- Lesz S., Dercz G. // J. Therm. Analyt. Calorim. 2016. V. 126. P. 19.
- Galimzyanov B.N., Doronina M.A., Mokshin A.V. // J. Non-Cryst. Solids. 2021. V. 572. Art. No. 121102.
- Tuckerman M.E., Alejandre J., López-Rendón R. et al. // J. Phys. A. 2006. V. 39. P. 5629.
- Shinoda W., Shiga M., Mikami M. // Phys. Rev. B. 2004. V. 69. Art. No. 134103.
- Bringa E.M., Caro A., Wang Y. et al. // Science. 2005. V. 309. P. 1838.
- Shen L.-M. // Acta Mech. Sin. 2012. V. 28. P. 1125.
- Evans D.J., Morriss G.P. Statistical mechanics of non-equilibrium liquids. Cambridge University Press, 2008. 328 p.
- Galimzyanov B.N., Mokshin A.V. // Int. J. Solids Struct. 2021. V. 224. Art. No. 111047.
- Xia L., Shan S.T., Ding D. et al. // Intermetallics. 2007. V. 15. P. 1046.
- Teker E., Danish M., Gupta M.K. et al. // Trans. Indian Inst. Met. 2022. V. 75. P. 717.
- Fan H., Wang Q., El-Awady J.A. et al. // Nature Commun. 2021. V. 12. P. 1845.
- Courtney T.H. Mechanical behavior of materials. Waveland Press, 2005. 752 p.
- Бобылев А.В. Механические и технологические свойства металлов. Справочник. М.: Металлургия, 1980.
- Wang W.H. // J. Appl. Phys. 2006. V. 99. Art. No. 093506.
- Wang Y., Wang Q., Zhao J. et al. // Scripta Mater. 2010. V. 63. P. 178.
![](/img/style/loading.gif)