Intermediate Process Control of the Fabrication of a Conducting Layer on the Surface of Nanofibrous Materials

N. N. Shcherbakova; V. K. Pereshivailov; Ya. V. Perevoznikova; V. V. Sleptsov

doi:10.1007/s10717-018-9988-6

Intermediate Process Control of the Fabrication of a Conducting Layer on the Surface of Nanofibrous Materials

Авторы: Shcherbakova N.N.¹, Pereshivailov V.K.², Perevoznikova Y.V.², Sleptsov V.V.³
Учреждения:
1. N. G. Chernyshevsky Saratov State Research University
2. NESK, JSC
3. Moscow Aviation Institute (National Research University)
Выпуск: Том 74, № 9-10 (2018)
Страницы: 329-331
Раздел: At Enterprises and Institutes
URL: https://journals.rcsi.science/0361-7610/article/view/245053
DOI: https://doi.org/10.1007/s10717-018-9988-6
ID: 245053

Цитировать

Полный текст

Открытый доступ
Доступ закрыт

Доступ предоставлен
Доступ закрыт

Только для подписчиков

Аннотация
Об авторах
Список литературы
Дополнительные файлы
Статистика

Аннотация

Coatings on glass witness samples, making it possible to set the process regimes for deposition, as well as the operational parameters of the setup — working current, voltage, limit and working vacuum as well as the required number of coating layers — were investigated. The measurement of the resistance of metallized coatings on nonwoven materials in definite regimes showed a value from 32 to 11 Ω/cm², as set by the experimental conditions.