Intermediate Process Control of the Fabrication of a Conducting Layer on the Surface of Nanofibrous Materials

N. N. Shcherbakova; V. K. Pereshivailov; Ya. V. Perevoznikova; V. V. Sleptsov

doi:10.1007/s10717-018-9988-6

Intermediate Process Control of the Fabrication of a Conducting Layer on the Surface of Nanofibrous Materials

Авторлар: Shcherbakova N.N.¹, Pereshivailov V.K.², Perevoznikova Y.V.², Sleptsov V.V.³
Мекемелер:
1. N. G. Chernyshevsky Saratov State Research University
2. NESK, JSC
3. Moscow Aviation Institute (National Research University)
Шығарылым: Том 74, № 9-10 (2018)
Беттер: 329-331
Бөлім: At Enterprises and Institutes
URL: https://journals.rcsi.science/0361-7610/article/view/245053
DOI: https://doi.org/10.1007/s10717-018-9988-6
ID: 245053

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Тек жазылушылар үшін

Аннотация
Авторлар туралы
Әдебиет тізімі
Қосымша файлдар
Статистика

Аннотация

Coatings on glass witness samples, making it possible to set the process regimes for deposition, as well as the operational parameters of the setup — working current, voltage, limit and working vacuum as well as the required number of coating layers — were investigated. The measurement of the resistance of metallized coatings on nonwoven materials in definite regimes showed a value from 32 to 11 Ω/cm², as set by the experimental conditions.