Intermediate Process Control of the Fabrication of a Conducting Layer on the Surface of Nanofibrous Materials

N. N. Shcherbakova; V. K. Pereshivailov; Ya. V. Perevoznikova; V. V. Sleptsov

doi:10.1007/s10717-018-9988-6

Intermediate Process Control of the Fabrication of a Conducting Layer on the Surface of Nanofibrous Materials

Autores: Shcherbakova N.N.¹, Pereshivailov V.K.², Perevoznikova Y.V.², Sleptsov V.V.³
Afiliações:
1. N. G. Chernyshevsky Saratov State Research University
2. NESK, JSC
3. Moscow Aviation Institute (National Research University)
Edição: Volume 74, Nº 9-10 (2018)
Páginas: 329-331
Seção: At Enterprises and Institutes
URL: https://journals.rcsi.science/0361-7610/article/view/245053
DOI: https://doi.org/10.1007/s10717-018-9988-6
ID: 245053

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

Coatings on glass witness samples, making it possible to set the process regimes for deposition, as well as the operational parameters of the setup — working current, voltage, limit and working vacuum as well as the required number of coating layers — were investigated. The measurement of the resistance of metallized coatings on nonwoven materials in definite regimes showed a value from 32 to 11 Ω/cm², as set by the experimental conditions.