| 期 |
栏目 |
标题 |
文件 |
| 卷 2016, 编号 1 (2016) |
Article |
Effect of the removal of the surface layer of a TRIP steel sheet on its phase composition after static tension at various strain rates |
|
| 卷 2016, 编号 4 (2016) |
Structure and Properties of the Deformed State |
Effect of the phase composition of the surface layer on the mechanical properties of 23Kh15N5AM3-Sh TRIP steel sheets |
|
| 卷 2016, 编号 4 (2016) |
Applied Problems of Strength and Plasticity |
Fatigue strength of low-activation ferritic–martensitic high-chromium EK-181 steel |
|
| 卷 2016, 编号 9 (2016) |
Article |
Mechanical properties of a nitrogen-bearing austenitic steel during static and cycle deformation |
|
| 卷 2016, 编号 10 (2016) |
Promising Materials and Technologies |
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting |
|
| 卷 2016, 编号 10 (2016) |
Promising Materials and Technologies |
TRIP effect in austenitic–martensitic VNS9-Sh steel at various strain rates |
|
| 卷 2017, 编号 4 (2017) |
Applied Problems of Strength and Plasticity |
Acoustic emission analysis of the stages of deformation of TRIP steel |
|
| 卷 2017, 编号 4 (2017) |
Diagnostics and Mechanical Test Techniques |
Effect of the strain rate on the mechanical properties of a sheet TRIP steel with a high martensite content |
|
| 卷 2017, 编号 10 (2017) |
Applied Problems of Strength and Plasticity |
Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel |
|
| 卷 2019, 编号 4 (2019) |
Advanced Materials and Technologies |
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting |
|
| 卷 2019, 编号 4 (2019) |
Applied Problems of Strength and Plasticity |
Mechanical Properties and Structure of a VNS9-Sh Steel as Functions of the Tempering Temperature |
|
| 卷 2019, 编号 4 (2019) |
Applied Problems of Strength and Plasticity |
Influence of a Zinc Coating on the Mechanical Properties of a Low-Carbon Steel Microalloyed with Niobium |
|
