| 期 |
标题 |
文件 |
| 卷 2019, 编号 10 (2019) |
Structure and High-Temperature Mechanical Properties of High-Carbon Niobium-Based Alloys |
(Eng)
|
|
Karpov M., Prokhorov D., Vnukov V., Stroganova T., Gnesin B., Gnesin I., Zheltyakova I., Svetlov I.
|
| 卷 2019, 编号 10 (2019) |
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering |
(Eng)
|
|
Korzhov V., Kiiko V., Zheltyakova I.
|
| 卷 2019, 编号 10 (2019) |
Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing |
(Eng)
|
|
Makhina D., Denisov V., Perminova Y., Butrim V., Nikulin S.
|
| 卷 2019, 编号 10 (2019) |
Structure and Electroerosion Resistance of the Ag–CuO Coating Prepared by Electroexplosive Sputtering on Copper Electrical Contacts |
(Eng)
|
|
Romanov D., Moskovskii S., Gromov V., Sosnin K., Filyakov A.
|
| 卷 2019, 编号 10 (2019) |
Wear Resistance of the Surface Layers in Silumin after Electron-Beam Treatment |
(Eng)
|
|
Zagulyaev D., Gromov V., Konovalov S., Glezer A., Panin S., Ivanov Y.
|
| 卷 2019, 编号 10 (2019) |
Effect of Thermohydrogen Treatment on the Manufacturing and Mechanical Properties of a Heat-Resistant VTI-4 Intermetallic Alloy |
(Eng)
|
|
Skvortsova S., Pozhoga O., Ovchinnikov A., Orlov A.
|
| 卷 2019, 编号 10 (2019) |
Amorphous-Alloy-Based Composites Prepared by High-Pressure Torsion |
(Eng)
|
|
Permyakova I., Blinova E., Shchetinin I., Savchenko E.
|
| 卷 2019, 编号 10 (2019) |
Fabrication, Structure, and Mechanical Properties of Composite Oxide Fibers for Brittle-Matrix Composites |
(Eng)
|
|
Kiiko V., Kolchin A., Novokhatskaya N.
|
| 卷 2019, 编号 10 (2019) |
Effect of the Thermomechanical Compacting Conditions on the Electrical Conductivity of an Al2O3/Graphene Composite Material |
(Eng)
|
|
Zholnin A., Tenishev A., Stolyarov V.
|
| 卷 2019, 编号 10 (2019) |
Possibilities of Ultrasonic Initiation of the Operation of TiNi Alloy Ring-Shaped Force Elements |
(Eng)
|
|
Chernyavskaya N., Volkov G., Khlopkov E.
|
| 卷 2019, 编号 4 (2019) |
Mechanical Properties of a Carbon Fiber Reinforced Plastic–Titanium Nickelide Functional Composite Material |
(Eng)
|
|
Kollerov M., Spektor V., Skoblin A., Gurtovoi S., Saakyan A., Gusev D.
|
| 卷 2019, 编号 4 (2019) |
Basic Principles of Alloying and Treatment of High-Nitrogen Austenitic Corrosion-Resistant Steels |
(Eng)
|
|
Bannykh I., Glezer A.
|
| 卷 2019, 编号 4 (2019) |
Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials |
(Eng)
|
|
Grechnikov F., Erisov Y., Petrov I.
|
| 卷 2019, 编号 4 (2019) |
Influence of Alloying Elements on the Deformation Mechanism and the Texture of Magnesium Alloys |
(Eng)
|
|
Betsofen S., Osintsev O., Grushin I., Petrov A., Speranskii K.
|
| 卷 2019, 编号 4 (2019) |
Texture and Anisotropy of the Mechanical Properties of Magnesium Alloys |
(Eng)
|
|
Betsofen S., Osintsev O., Grushin I., Petrov A., Speranskii K.
|
| 卷 2019, 编号 4 (2019) |
Selective Deformation of Single Macromolecules and Biomolecular Structures as a Method for Remote Control of Their Properties and Functions for Next-Generation Medicine |
(Eng)
|
|
Golovin Y., Klyachko N., Zhigachev A., Gribanovskii S., Efremova M., Majouga A., Kabanov A.
|
| 卷 2019, 编号 4 (2019) |
Adhesion Strength of Ceramic Coatings to Dental Ni–Cr Alloy Fabricated by Casting with 3D Printed Patterns |
(Eng)
|
|
Dikova T., Dolgov N., Vasilev T., Katreva I.
|
| 卷 2019, 编号 4 (2019) |
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting |
(Eng)
|
|
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Antonova O., Kolmakov A.
|
| 卷 2019, 编号 4 (2019) |
Structural-Phase State and the Properties of Silumin after Electron-Beam Surface Treatment |
(Eng)
|
|
Ivanov Y., Gromov V., Konovalov S., Zagulyaev D., Petrikova E.
|
| 卷 2018, 编号 10 (2018) |
Physicomechanical Properties of Porous Zirconia Ceramics |
(Eng)
|
|
Golovin Y., Korenkov V., Razlivalova S., Rodaev V.
|
| 卷 2018, 编号 10 (2018) |
Deformation Behavior of a Co69Fe4Cr4Si12B11 Amorphous Wire for Different Types of Loading |
(Eng)
|
|
Molokanov V., Chueva T., Umnova N., Umnov P.
|
| 卷 2018, 编号 4 (2018) |
Possibility to Strengthen the Joint between a Titanium Alloy and Stainless Steel Formed by Diffusion Welding through an Interlayer |
(Eng)
|
|
Khazgaliev R., Imayev M., Mulyukov R.
|
| 卷 2018, 编号 4 (2018) |
Temperature Dependence of the Ultimate Strength of in situ Multicomponent Nb–Si–X (X = Ti, Hf, W, Cr, Al, Mo) Composites |
(Eng)
|
|
Svetlov I., Karpov M., Neuman A., Stroganova T.
|
| 卷 2018, 编号 4 (2018) |
Phase Composition and Magnetic Properties of Nd2Fe14B/α-Fe Nanocomposites Prepared by Mechanical Alloying |
(Eng)
|
|
Savchenko A., Menushenkov V., Plastinin A., Shchetinin I., Rafal’skii A., Bordyuzhin I., Ryazantsev V., Verbetskii V.
|
| 卷 2018, 编号 4 (2018) |
Phase Composition, Texture, and Residual Stresses in Al–Cu–Li Friction Stir Welds |
(Eng)
|
|
Betsofen S., Lukin V., Dolgova M., Panteleev M., Kabanova Y.
|
| 1 - 25 的 37 信息 |
1 2 > >>
|
