电邮这篇文章 Flow stress of EK-181 steel as a function of the strain rate and the strain
- 作者: Kostyukhina A.1, Leont’eva-Smirnova M.1,2, Izmalkov I.2, Fedotov P.2, Loshmanov L.1
-
隶属关系:
- National Research Nuclear University MEPhI
- Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
- 期: 卷 2017, 编号 7 (2017)
- 页面: 576-578
- 栏目: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/171577
- DOI: https://doi.org/10.1134/S0036029517070096
- ID: 171577
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
Branch pipes (segments of fuel claddings of a full cross section) and ring specimens of two sizes were subjected to tensile tests. The experimental results are used to plot hardening curves, which are true stress–strain curves. The set of these curves is employed to plot the desired flow surface of EK-181 steel.
作者简介
A. Kostyukhina
National Research Nuclear University MEPhI
编辑信件的主要联系方式.
Email: KostyukhinaN@yandex.ru
俄罗斯联邦, Moscow
M. Leont’eva-Smirnova
National Research Nuclear University MEPhI; Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
俄罗斯联邦, Moscow; Moscow
I. Izmalkov
Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
俄罗斯联邦, Moscow
P. Fedotov
Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
俄罗斯联邦, Moscow
L. Loshmanov
National Research Nuclear University MEPhI
Email: KostyukhinaN@yandex.ru
俄罗斯联邦, Moscow
