Отправить статью по E-mail Flow stress of EK-181 steel as a function of the strain rate and the strain
- Авторы: Kostyukhina A.1, Leont’eva-Smirnova M.1,2, Izmalkov I.2, Fedotov P.2, Loshmanov L.1
-
Учреждения:
- National Research Nuclear University MEPhI
- Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
- Выпуск: Том 2017, № 7 (2017)
- Страницы: 576-578
- Раздел: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/171577
- DOI: https://doi.org/10.1134/S0036029517070096
- ID: 171577
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
Branch pipes (segments of fuel claddings of a full cross section) and ring specimens of two sizes were subjected to tensile tests. The experimental results are used to plot hardening curves, which are true stress–strain curves. The set of these curves is employed to plot the desired flow surface of EK-181 steel.
Ключевые слова
Об авторах
A. Kostyukhina
National Research Nuclear University MEPhI
Автор, ответственный за переписку.
Email: KostyukhinaN@yandex.ru
Россия, Moscow
M. Leont’eva-Smirnova
National Research Nuclear University MEPhI; Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Россия, Moscow; Moscow
I. Izmalkov
Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Россия, Moscow
P. Fedotov
Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Россия, Moscow
L. Loshmanov
National Research Nuclear University MEPhI
Email: KostyukhinaN@yandex.ru
Россия, Moscow
