Flow stress of EK-181 steel as a function of the strain rate and the strain
- Авторлар: Kostyukhina A.1, Leont’eva-Smirnova M.1,2, Izmalkov I.2, Fedotov P.2, Loshmanov L.1
-
Мекемелер:
- National Research Nuclear University MEPhI
- Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
- Шығарылым: Том 2017, № 7 (2017)
- Беттер: 576-578
- Бөлім: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/171577
- DOI: https://doi.org/10.1134/S0036029517070096
- ID: 171577
Дәйексөз келтіру
Аннотация
Branch pipes (segments of fuel claddings of a full cross section) and ring specimens of two sizes were subjected to tensile tests. The experimental results are used to plot hardening curves, which are true stress–strain curves. The set of these curves is employed to plot the desired flow surface of EK-181 steel.
Негізгі сөздер
Авторлар туралы
A. Kostyukhina
National Research Nuclear University MEPhI
Хат алмасуға жауапты Автор.
Email: KostyukhinaN@yandex.ru
Ресей, Moscow
M. Leont’eva-Smirnova
National Research Nuclear University MEPhI; Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Ресей, Moscow; Moscow
I. Izmalkov
Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Ресей, Moscow
P. Fedotov
Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Ресей, Moscow
L. Loshmanov
National Research Nuclear University MEPhI
Email: KostyukhinaN@yandex.ru
Ресей, Moscow