Pesquisa

Edição
Título
Autores
Synthesis of new metal-matrix Al–Al2O3–graphene composite materials
Elshina L., Muradymov R., Kvashnichev A., Vichuzhanin D., Molchanova N., Pankratov A.
Technique of determining the parameters of rapid strengthening of an aluminum alloy during hot rolling
Loginov Y., Golovnin M.
Comparative Analysis of the Mechanical Properties of the Friction Stir Welding Joints of Various Aluminum Alloys
Ryl’kov E., Isupov F., Naumov A., Panchenko O., Zhabrev L.
Aging-Induced Hardening of Transition-Metal-Containing Al–Mg–Si Alloys Subjected to Deformation under Different Conditions
Bochvar N., Rokhlin L., Tarytina I., Leonova N.
Effect of Aging on the Nanostructuring and Strength of a D16 Aluminum Alloy
Markushev M., Avtokratova E., Ilyasov R., Krymskiy S., Sitdikov O.
Effect of the Thermomechanical Treatment Conditions on the Consolidation, the Structure, and the Mechanical Properties of Bulk Al–Mg–C Nanocomposites
Aborkin A., Alymov M., Sobol’kov A., Khor’kov K., Babin D.
Viscosity of the liquid Al–6Mg–1Mn–0.2Sc–0.1Zr alloy
Reznik P., Chikova O., Tsepelev V.
Effect of modification on the solidification of Al–Si aluminum alloys
Petrov I., Berezhnoi D., Ryakhovskii A., Moiseev V.
Elemental Composition and Microhardness of the Coatings Prepared on Faced Aluminum Alloys by Plasma Electrolytic Oxidation in a Silicate–Alkaline Electrolyte
Kolomeichenko A., Kravchenko I.
Effect of Small Scandium Additions on the Properties of an Aluminum Foil for Oxide-Electrolytic Capacitors
Pushkarev B., Mikhailova S., Lad’yanov V., Rybin S., Strelkov V., Lebedev V., Karban’ O., Stepanov A.
Change in the Structure and the Properties of Cylindrical Alloy AMg6 Shells in Loading by Glancing Detonation Waves
Brodova I., Smirnov E., Shirinkina I., Astaf’ev V., Yablonskikh T., Koval’ A., Degtyarev A., Shorokhov E.
Effect of Transition Metals on the Properties of Aluminum-Lead Composite Materials
Kovtunov A., Khokhlov Y., Myamin S.
Thermodynamics of the oxygen solutions in the aluminum-containing Ni–Co melts
Aleksandrov A., Dashevskii V., Leont’ev L.
Effect of controlled arc motion on the surface of a weldpool on the quality of a weld during argon-arc welding of a 1565chM aluminum alloy
Ovchinnikov V., Drits A., Kurbatova I., Rastopchin R.
Consumable Tool for Coating Deposition by Joint Deformation of the Base and Tool Materials
Isupov F., Panchenko O., Naumov A., Alekseeva M., Zhabrev L., Popovich A.
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Antonova O., Kolmakov A.
Microstructure of the Joint of 1565chM Alloy Sheets Fabricated by Friction Stir Welding
Ovchinnikov V., Badall N.
Effect of the Grain Size of the Initial Structure of 1565chM Alloy on the Structure and Properties of the Joints Fabricated by Friction Stir Welding
Ovchinnikov V., Drits A., Gureeva M., Malov D.
Electrochemical borating of titanium-containing carbographite materials
Gorlanov E., Bazhin V., Vlasov A.
26 - 44 de 44 resultados << < 1 2 
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies