Email this article Effect of modification on the solidification of Al–Si aluminum alloys
- Authors: Petrov I.A.1, Berezhnoi D.V.1, Ryakhovskii A.P.1, Moiseev V.S.1
-
Affiliations:
- National Research University Moscow Aviation Institute
- Issue: Vol 2017, No 3 (2017)
- Pages: 184-187
- Section: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/171328
- DOI: https://doi.org/10.1134/S0036029517030089
- ID: 171328
Cite item
Open Access
Access granted
Subscription Access
Abstract
The solidification of the AK12 alloy processed by a standard flux and a combined modifying flux, which significantly increases the mechanical properties of the alloy at a significant increase in the modifying effect time, is studied. The experimental results are simulated using the ProCAST software package.
About the authors
I. A. Petrov
National Research University Moscow Aviation Institute
Author for correspondence.
Email: castingtlp@mati.ru
Russian Federation, Volokolamskoe shos. 4, A-80, Moscow, 125993
D. V. Berezhnoi
National Research University Moscow Aviation Institute
Email: castingtlp@mati.ru
Russian Federation, Volokolamskoe shos. 4, A-80, Moscow, 125993
A. P. Ryakhovskii
National Research University Moscow Aviation Institute
Email: castingtlp@mati.ru
Russian Federation, Volokolamskoe shos. 4, A-80, Moscow, 125993
V. S. Moiseev
National Research University Moscow Aviation Institute
Email: castingtlp@mati.ru
Russian Federation, Volokolamskoe shos. 4, A-80, Moscow, 125993
