Russian Metallurgy (Metally)
ISSN 0036-0295 (Print)
ISSN 1555-6255 (Online)
Мәзір
Мұрағат
Бастапқы
Журнал туралы
Редакция тобы
Редакция саясаты
Авторларға арналған ережелер
Журнал туралы
Шығарылымдар
Іздеу
Ағымдағы шығарылым
Мұрағат
Байланыс
Барлық журналдар
Пайдаланушы
Пайдаланушының аты
Құпиясөз
Мені есте сақтау
Құпия сөзді ұмыттыңыз ба?
Тіркеу
Хабарламалар
Қарау
Тіркелу
Іздеу
Іздеу
Іздеу аумағы
Барлығы
Авторлар
Атауы
Түйіндеме
Терминдер
Толық мәтін
Парақтау
шығарылымдар
авторлар
атаулары бойынша
бөлімдер бойынша
басқа журналдар
Жазылу
Жазылымды тексеру үшін жүйеге кіріңіз
Кілтсөздер
aluminum
aluminum alloys
composite material
deformation
diffusion
hardness
heat treatment
impact toughness
mechanical properties
melt
melts
microhardness
microstructure
nickel
oxidation
phase composition
rare-earth metals
steel
strength
structure
titanium
Ақпарат
Оқырмандар үшін
Авторларға
Кітапханалар үшін
×
Пайдаланушы
Пайдаланушының аты
Құпиясөз
Мені есте сақтау
Құпия сөзді ұмыттыңыз ба?
Тіркеу
Хабарламалар
Қарау
Тіркелу
Іздеу
Іздеу
Іздеу аумағы
Барлығы
Авторлар
Атауы
Түйіндеме
Терминдер
Толық мәтін
Парақтау
шығарылымдар
авторлар
атаулары бойынша
бөлімдер бойынша
басқа журналдар
Жазылу
Жазылымды тексеру үшін жүйеге кіріңіз
Кілтсөздер
aluminum
aluminum alloys
composite material
deformation
diffusion
hardness
heat treatment
impact toughness
mechanical properties
melt
melts
microhardness
microstructure
nickel
oxidation
phase composition
rare-earth metals
steel
strength
structure
titanium
Ақпарат
Оқырмандар үшін
Авторларға
Кітапханалар үшін
Бастапқы
>
Іздеу
>
Автор туралы ақпарат
Автор туралы ақпарат
Terent’ev, V.
Шығарылым
Бөлім
Атауы
Файл
Том 2016, № 1 (2016)
Article
Effect of the removal of the surface layer of a TRIP steel sheet on its phase composition after static tension at various strain rates
Том 2016, № 4 (2016)
Structure and Properties of the Deformed State
Effect of the phase composition of the surface layer on the mechanical properties of 23Kh15N5AM3-Sh TRIP steel sheets
Том 2016, № 4 (2016)
Applied Problems of Strength and Plasticity
Fatigue strength of low-activation ferritic–martensitic high-chromium EK-181 steel
Том 2016, № 9 (2016)
Article
Mechanical properties of a nitrogen-bearing austenitic steel during static and cycle deformation
Том 2016, № 10 (2016)
Promising Materials and Technologies
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
Том 2016, № 10 (2016)
Promising Materials and Technologies
TRIP effect in austenitic–martensitic VNS9-Sh steel at various strain rates
Том 2017, № 4 (2017)
Applied Problems of Strength and Plasticity
Acoustic emission analysis of the stages of deformation of TRIP steel
Том 2017, № 4 (2017)
Diagnostics and Mechanical Test Techniques
Effect of the strain rate on the mechanical properties of a sheet TRIP steel with a high martensite content
Том 2017, № 10 (2017)
Applied Problems of Strength and Plasticity
Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel
Том 2019, № 4 (2019)
Advanced Materials and Technologies
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Том 2019, № 4 (2019)
Applied Problems of Strength and Plasticity
Mechanical Properties and Structure of a VNS9-Sh Steel as Functions of the Tempering Temperature
Том 2019, № 4 (2019)
Applied Problems of Strength and Plasticity
Influence of a Zinc Coating on the Mechanical Properties of a Low-Carbon Steel Microalloyed with Niobium
Осы сайт cookie-файлдарды пайдаланады
Біздің сайтты пайдалануды жалғастыра отырып, сіз сайттың дұрыс жұмыс істеуін қамтамасыз ететін cookie файлдарын өңдеуге келісім бересіз.< / br>< / br>
cookie файлдары туралы< / a>
TOP