Application of Thickness-Shaped Workpieces to Control the Wall Thickness of Lead-Formed Shell Parts

M. A. Baburin; V. D. Baskakov; O. V. Zarubina; S. V. Ladov; Ya. M. Nikol’skaya; S. V. Fedorov

doi:10.1134/S0036029517130031

Application of Thickness-Shaped Workpieces to Control the Wall Thickness of Lead-Formed Shell Parts

Authors: Baburin M.A.¹, Baskakov V.D.¹, Zarubina O.V.¹, Ladov S.V.¹, Nikol’skaya Y.M.¹, Fedorov S.V.¹
Affiliations:
1. Bauman Moscow State Technical University
Issue: Vol 2017, No 13 (2017)
Pages: 1136-1140
Section: Metal Forming
URL: https://journals.rcsi.science/0036-0295/article/view/171933
DOI: https://doi.org/10.1134/S0036029517130031
ID: 171933

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Statistics

Abstract

The influence of the geometric parameters of variable-thickness steel disk workpieces on the wall thickness of cylindrical shell parts with a spherical bottom, which are produced by lead stamping, is experimentally studied. The found laws of changing the dome thickness and the edge thickness of stamped parts allowed us to make recommendations for designing the lead stamping of such parts with a given wall thickness distribution.