Application of Thickness-Shaped Workpieces to Control the Wall Thickness of Lead-Formed Shell Parts
- 作者: Baburin M.1, Baskakov V.1, Zarubina O.1, Ladov S.1, Nikol’skaya Y.1, Fedorov S.1
-
隶属关系:
- Bauman Moscow State Technical University
- 期: 卷 2017, 编号 13 (2017)
- 页面: 1136-1140
- 栏目: Metal Forming
- URL: https://journals.rcsi.science/0036-0295/article/view/171933
- DOI: https://doi.org/10.1134/S0036029517130031
- ID: 171933
如何引用文章
详细
The influence of the geometric parameters of variable-thickness steel disk workpieces on the wall thickness of cylindrical shell parts with a spherical bottom, which are produced by lead stamping, is experimentally studied. The found laws of changing the dome thickness and the edge thickness of stamped parts allowed us to make recommendations for designing the lead stamping of such parts with a given wall thickness distribution.
作者简介
M. Baburin
Bauman Moscow State Technical University
Email: baskakov_vd@mail.ru
俄罗斯联邦, Moscow
V. Baskakov
Bauman Moscow State Technical University
编辑信件的主要联系方式.
Email: baskakov_vd@mail.ru
俄罗斯联邦, Moscow
O. Zarubina
Bauman Moscow State Technical University
Email: baskakov_vd@mail.ru
俄罗斯联邦, Moscow
S. Ladov
Bauman Moscow State Technical University
Email: baskakov_vd@mail.ru
俄罗斯联邦, Moscow
Ya. Nikol’skaya
Bauman Moscow State Technical University
Email: baskakov_vd@mail.ru
俄罗斯联邦, Moscow
S. Fedorov
Bauman Moscow State Technical University
Email: baskakov_vd@mail.ru
俄罗斯联邦, Moscow
![](/img/style/loading.gif)