Comparison of appearance, microstructure and tensile properties during friction stir welding processes of Al–Si alloys
- Авторлар: Shailesh Rao A.1, Yuvaraja N.1
-
Мекемелер:
- Department of Mechanical Engineering
- Шығарылым: Том 118, № 7 (2017)
- Беттер: 716-722
- Бөлім: Strength and Plasticity
- URL: https://journals.rcsi.science/0031-918X/article/view/167148
- DOI: https://doi.org/10.1134/S0031918X17070092
- ID: 167148
Дәйексөз келтіру
Аннотация
The scope of this paper is to evaluate and discuss the flow phenomena of Al–2Si and Al–12Si alloys, which were joined through friction stir welding processes. The feed rate of 50mm/min and tool rotation of 600, 900, and 1200 rpm were selected for the processes. There was much change in the surface morphology with smoothness for Al–2Si alloy and roughness for Al–12 Si alloys. The microstructure studies on the weld zone were performed. The mechanical properties like tensile strength and hardness are discussed in detail.
Негізгі сөздер
Авторлар туралы
A. Shailesh Rao
Department of Mechanical Engineering
Email: info@pleiadesonline.com
Үндістан, Bangalore
Naik Yuvaraja
Department of Mechanical Engineering
Email: info@pleiadesonline.com
Үндістан, Bangalore