| Issue |
Title |
File |
| Vol 120, No 12 (2019) |
Mechanical Properties of the Al–Zn–Mg–Fe–Ni Alloy of Eutectic Type at Different Strain Rates |
(Eng)
|
|
Petrova A.N., Brodova I.G., Razorenov S.V., Shorokhov E.V., Akopyan T.K.
|
| Vol 120, No 12 (2019) |
Deformation and Fracture of 13CrMoNbV Ferritic-Martensitic Steel at Elevated Temperature |
(Eng)
|
|
Churyumov A.Y.
|
| Vol 120, No 12 (2019) |
Formation of the Structural State of a High-Strength Low-Alloy Steel upon Hot Rolling and Controlled Cooling |
(Eng)
|
|
Urtsev V.N., Kornilov V.L., Shmakov A.V., Krasnov M.L., Stekanov P.A., Platov S.I., Mokshin E.D., Urtsev N.V., Schastlivtsev V.M., Razumov I.K., Gornostyrev Y.N.
|
| Vol 120, No 11 (2019) |
Hot Deformation Behavior of 6063 Aluminum Alloy Studied Using Processing Maps and Microstructural Analysis |
(Eng)
|
|
Yuanchun Huang ., Liu L., Xiao Z., Wang S.
|
| Vol 120, No 11 (2019) |
Effect of Multipass on Microstructure and Impact Toughness of As-Cast Al–20Si Alloy via Friction Stir Processing |
(Eng)
|
|
Yongjing Yang ., Hua P., Li X., Chen K., Zhou W.
|
| Vol 120, No 11 (2019) |
Vacancy Migration Energy in Steels and Alloys |
(Eng)
|
|
Kozlov A.V., Portnykh I.A., Asiptsov O.I.
|
| Vol 120, No 10 (2019) |
Modeling of Wear Behavior of Al–Si/Al2O3 Metal Matrix Composites |
(Eng)
|
|
Megahed M., Saber D., Agwa M.A.
|
| Vol 120, No 10 (2019) |
Effect of The Processes of Self-Tempering and Tempering on The Mechanical Characteristics and the Character of Fracture of Low-Carbon Martenstic Steel Quenched in Air |
(Eng)
|
|
Vorobev R.A., Dubinskii V.N., Evstifeeva V.V.
|
| Vol 120, No 10 (2019) |
Atomistic Modeling of Stacking Faults in Cementite. Planes Containing Vector [001] |
(Eng)
|
|
Kar’kina L.E., Kar’kin I.N.
|
| Vol 120, No 10 (2019) |
Mechanical and Thermomechanical Properties of the Ti50Pd40Ni10 Alloy with a High-Temperature Shape-Memory Effect Studied on a Workpiece in the Form of a Bar in the Annealed State |
(Eng)
|
|
Popov N.N., Presnyakov D.V., Lar’kin V.F., Suvorova E.B., Kostyleva A.A.
|
| Vol 120, No 10 (2019) |
The Microstructure and High-Strain-Rate Superplasticity of the Al–Mg–Ni–Fe–Mn–Cr–Zr Alloy |
(Eng)
|
|
Kishchik A.A., Kotov A.D., Mikhaylovskaya A.V.
|
| Vol 120, No 10 (2019) |
Mechanisms of Superplastic High-Rate Deformation in the Al–Mg–Zn–Fe–Ni–Zr–Sc Alloy |
(Eng)
|
|
Yakovtseva O.A., Kotov A.D., Sitkina M.N., Irzhak A.V., Mikhaylovskaya A.V.
|
| Vol 120, No 10 (2019) |
Heat Criterion of the Change of Strain-Hardening Stages in Austenitic Stainless Steel |
(Eng)
|
|
Lunev A.G., Nadezhkin M.V.
|
| Vol 120, No 9 (2019) |
Influence of the Direction of Propagation of the Main Crack on the Fracture Mechanism upon Impact Bending of Samples of High-Viscous Steel with a Filamentary Structure. Compression Region |
(Eng)
|
|
Morozova A.N., Schapov G.V., Khotinov V.A., Farber V.M., Selivanova O.V.
|
| Vol 120, No 9 (2019) |
Effect of Deep Cryogenic Treatment on Aging Processes of Al–Mg–Si Alloy |
(Eng)
|
|
Yuanchun Huang ., Li Y., Ren X., Xiao Z.
|
| Vol 120, No 9 (2019) |
Influence of the Direction of Propagation of the Main Crack on the Fracture Mechanism upon Impact Bending of Samples of High-Viscous Steel with a Filamentary Structure. Tensile Region |
(Eng)
|
|
Morozova A.N., Schapov G.V., Khotinov V.A., Farber V.M., Selivanova O.V.
|
| Vol 120, No 9 (2019) |
Influence of Mg on Micro-Mechanical Behaviour of as Cast Al–Mg System |
(Eng)
|
|
Panchal H.N., Rao V.J.
|
| Vol 120, No 9 (2019) |
The Effect of Deep Cryogenic Treatment on Microstructure and Wear Behavior of H11 Tool Steel |
(Eng)
|
|
Jalil Soleimany ., Ghayour H., Amini K., Gharavi F.
|
| Vol 120, No 9 (2019) |
Microstructure and Properties of NiFeCrBSi/WC Composite Coatings Fabricated by Vacuum Cladding |
(Eng)
|
|
Han C.F., Zhang X.D., Sun Y.F.
|
| Vol 120, No 8 (2019) |
Characterization of Microstructure and Mechanical Properties of Multilayer Al/Cu/Mg/Ni Composite Produced through Accumulative Roll Bonding |
(Eng)
|
|
Shakouri S., Eghbali B.
|
| Vol 120, No 8 (2019) |
Microstructure Evolution and Mechanical Properties of the T6 Heat Treated AA6063 Alloy Produced by Squeeze Casting |
(Eng)
|
|
Souissi S., Barhoumi H., M. ben Amar ., Elhalouani F.
|
| Vol 120, No 8 (2019) |
Stages of Plastic Flow of Silumin-Matrix-Based Composites during Compression |
(Eng)
|
|
Rusin N.M., Skorentsev A.L.
|
| Vol 120, No 8 (2019) |
Model of Development of Knock-On Atom Cascades in Solids |
(Eng)
|
|
Metelkin E.V., Manvelov A.N., Ponomarev A.Y., Shmyrev V.I.
|
| Vol 120, No 7 (2019) |
Effect of Zr Addition on Microstructure and Properties of Al–Sn–Cu Based Alloy |
(Eng)
|
|
Xianwei Ren ., Huang Y., Liu Y.
|
| Vol 120, No 7 (2019) |
Structure and Properties of Antifriction Cu, Cu–C, and DLC Coatings |
(Eng)
|
|
Kiryukhantsev-Korneev F.V., Bondarev A.V.
|
| 1 - 25 of 179 Items |
1 2 3 4 5 6 7 8 > >>
|
