The Microstructure and High-Strain-Rate Superplasticity of the Al–Mg–Ni–Fe–Mn–Cr–Zr Alloy


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The microstructure, superplasticity characteristics at a subsolidus temperature (540°C), and the room-temperature mechanical properties of an alloy of the Al–Mg–Ni–Fe–Mn–Cr–Zr system have been investigated using the methods of scanning and transmission electron microscopy and uniaxial tensile tests. The alloy has a bimodal particle-size distribution; it contains eutectic particles of Al9FeNi with an average size of 0.6 μm; and dispersoids with an average size of 75 nm. The particles of the secondary phases ensure grain size of approximately 4 μm after the recrystallization subsolidus annealing of the cold-rolled sheet. Due to the microsize grain structure, the alloy demonstrates a relative elongation to 500% at a subsolidus temperature in the range of the constant strain rates of 5 × 10–3 to 3 × 10–2 s–1, yield stress 215 MPa, and ultimate strength 330 MPa.

作者简介

A. Kishchik

National University of Science and Technology “MISiS”

Email: mihaylovskaya@misis.ru
俄罗斯联邦, Moscow, 119049

A. Kotov

National University of Science and Technology “MISiS”

Email: mihaylovskaya@misis.ru
俄罗斯联邦, Moscow, 119049

A. Mikhaylovskaya

National University of Science and Technology “MISiS”

编辑信件的主要联系方式.
Email: mihaylovskaya@misis.ru
俄罗斯联邦, Moscow, 119049

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2019