Issue |
Title |
File |
Vol 117, No 7 (2016) |
Effect of deformation texture on the anisotropy of elasticity and damage of two-phase steel sheets |
 (Eng)
|
Bryukhanov A.A., Gerstein G., Dyachok D.A., Nürnberger F.
|
Vol 117, No 7 (2016) |
Kinetics and fracture behavior under cycle loading of an Al–Cu–Mg–Ag alloy |
 (Eng)
|
Gazizov M.R., Kaibyshev R.O.
|
Vol 117, No 7 (2016) |
Influence of Nd and Y on texture of as-extruded Mg–5Li–3Al–2Zn alloy |
 (Eng)
|
Wu L., Zhang T., Cui C., Wu R., Zhang M., Hou L.
|
Vol 117, No 7 (2016) |
Effect of alloying on superplasticity of two-phase brasses |
 (Eng)
|
Yakovtseva O.A., Mikhailovskaya A.V., Kotov A.D., Portnoi V.K.
|
Vol 117, No 6 (2016) |
Superhardness effect in transition-metal diborides films |
 (Eng)
|
Bazhin A.I., Goncharov A.A., Pogrebnyak A.D., Stupak V.A., Goncharova S.A.
|
Vol 117, No 6 (2016) |
Analysis of factors responsible for the accelerated creep rupture of 12% Cr martensitic steel weld joints |
 (Eng)
|
Kudryavtsev A.S., Okhapkin K.A., Mikhailov M.S., Skutin V.S., Zubova G.E., Fedotov B.V.
|
Vol 117, No 6 (2016) |
Characteristics of radiation porosity and structural phase state of reactor austenitic 07C–16Cr–19Ni–2Mo–2Mn–Ti–Si–V–P–B Steel after neutron irradiation at a temperature of 440–600°C to damaging doses of 36–94 dpa |
 (Eng)
|
Portnykh I.A., Panchenko V.L.
|
Vol 117, No 6 (2016) |
The analysis of severely deformed pure Fe structure aided by X-ray diffraction profile |
 (Eng)
|
Forouzanmehr N., Nili-Ahmadabadi M., Bönisch M.
|
Vol 117, No 6 (2016) |
Structure and properties of the Al/SiC composite material |
 (Eng)
|
Pugacheva N.B., Michurov N.S., Bykova T.M.
|
Vol 117, No 5 (2016) |
Changes in the flow stress of copper and duralumin under the action of a dc magnetic field |
 (Eng)
|
Kraiev M.V.
|
Vol 117, No 5 (2016) |
Effect of compaction method on the structure and properties of bulk Cu + Cr3C2 composites |
 (Eng)
|
Eremina M.A., Lomaeva S.F., Paranin S.N., Demakov S.L., Elsukov E.P.
|
Vol 117, No 5 (2016) |
Production, structure, texture, and mechanical properties of severely deformed magnesium |
 (Eng)
|
Volkov A.Y., Antonova O.V., Kamenetskii B.I., Klyukin I.V., Komkova D.A., Antonov B.D.
|
Vol 117, No 4 (2016) |
Constitutive relations for determining the critical conditions for dynamic recrystallization behavior |
 (Eng)
|
Choe J.I.
|
Vol 117, No 4 (2016) |
Effect of torsion conditions under high pressure on the structure and strengthening of the Zr–1% Nb alloy |
 (Eng)
|
Rogachev S.O., Rozhnov A.B., Nikulin S.A., Rybal’chenko O.V., Gorshenkov M.V., Chzhen V.G., Dobatkin S.V.
|
Vol 117, No 4 (2016) |
Mechanical characteristics and microstructure of weld joint of high-temperature martensitic steel containing 9% Cr |
 (Eng)
|
Shakhova Y.E., Belyakov A.N., Kaibyshev R.O.
|
Vol 117, No 4 (2016) |
Mechanical behavior and brittle–ductile transition of high-chromium martensitic steel |
 (Eng)
|
Odnobokova M.V., Kipelova A.Y., Belyakov A.N., Kaibyshev R.O.
|
Vol 117, No 4 (2016) |
Migration and accumulation at dislocations of transmutation helium in austenitic steels upon neutron irradiation |
 (Eng)
|
Kozlov A.V., Portnykh I.A.
|
Vol 117, No 4 (2016) |
Separations in steels subjected to controlled rolling, followed by accelerated cooling |
 (Eng)
|
Farber V.M., Khotinov V.A., Belikov S.V., Selivanova O.V., Lezhnin N.V., Morozova A.N., Karabonalov M.S., Zhilyakov A.Y.
|
Vol 117, No 3 (2016) |
Specific Features of the Nucleation and Growth of Fatigue Cracks in Steel under Cyclic Dynamic Compression |
 (Eng)
|
Popelyukh A.I., Popelyukh P.A., Bataev A.A., Nikulina A.A., Smirnov A.I.
|
Vol 117, No 3 (2016) |
Structure and Mechanical Properties of Nitrogen Austenitic Steel after Ultrasonic Forging |
 (Eng)
|
Narkevich N.A., Tolmachev A.I., Vlasov I.V., Surikova N.S.
|
Vol 117, No 3 (2016) |
Effect of Boron on the Kinetics of Low-Temperature Decomposition of Martensite in Quenched Medium-Carbon Steel |
 (Eng)
|
Alekseev A.A., Grinberg E.M.
|
Vol 117, No 3 (2016) |
The Accumulation and Annealing of Radiation-Induced Defects and the Effect of Hydrogen on the Physicomechanical Properties of the V−4Ti−4Cr and V−10Ti−5Cr Vanadium-Based Alloys under Low-Temperature (at 77 K) Neutron Irradiation |
 (Eng)
|
Arbuzov V.L., Goshchitskii B.N., Sagaradze V.V., Danilov S.E., Zuev Y.N., Kar’kin A.E., Parkhomenko V.D., Kozlov A.V., Chernov V.M.
|
Vol 117, No 3 (2016) |
Effect of Friction-Induced Deformation on the Structure, Microhardness, and Wear Resistance of Austenitic Chromium—Nickel Stainless Steel Subjected to Subsequent Oxidation |
 (Eng)
|
Korshunov L.G., Chernenko N.L.
|
Vol 117, No 2 (2016) |
Structure, phase composition, and strengthening of cast Al–Ca–Mg–Sc alloys |
 (Eng)
|
Belov N.A., Naumova E.A., Bazlova T.A., Alekseeva E.V.
|
Vol 117, No 2 (2016) |
Simulation of the elastic deformation of laser-welded joints of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert |
 (Eng)
|
Pugacheva N.B., Myasnikova M.V., Michurov N.S.
|
151 - 175 of 179 Items |
<< < 2 3 4 5 6 7 8 > >>
|