Constitutive relations for determining the critical conditions for dynamic recrystallization behavior
- 作者: Choe J.I.1
-
隶属关系:
- Department of Materials Science and Engineering
- 期: 卷 117, 编号 4 (2016)
- 页面: 364-370
- 栏目: Strength and Plasticity
- URL: https://journals.rcsi.science/0031-918X/article/view/166702
- DOI: https://doi.org/10.1134/S0031918X16040037
- ID: 166702
如何引用文章
详细
A series mathematical model has been developed for the prediction of flow stress and microstructure evolution during the hot deformation of metals such as copper or austenitic steels with low stacking fault energies, involving features of both diffusional flow and dislocation motion. As the strain rate increases, multiple peaks on the stress-strain curve decrease. At a high strain rate, the stress rises to a single peak, while dynamic recrystallization causes an oscillatory behavior. At a low strain rate (when there is sufficient time for the recrystallizing grains to grow before they become saturated with high dislocation density with an increase in strain rate), the difference in stored stress between recrystallizing and old grains diminishes, resulting in reduced driving force for grain growth and rendering smaller grains in the alloy. The final average grain size at the steady stage (large strain) increases with a decrease in the strain rate. During large strain deformation, grain size reduction accompanying dislocation creep might be balanced by the grain growth at the border delimiting the ranges of realization (field boundary) of the dislocation-creep and diffusion-creep mechanisms.
作者简介
J. Choe
Department of Materials Science and Engineering
编辑信件的主要联系方式.
Email: jichoe@dankook.ac.kr
韩国, Cheonan, 330-714
补充文件
