Отправить статью по E-mail Prediction of Carbon Liquation in Steel Forging Ingot Cross Section
- Авторы: Romashkin A.N.1, Dub V.S.1, Tolstykh D.S.1, Ivanov I.A.1, Mal’ginov A.N.1
-
Учреждения:
- Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
- Выпуск: Том 60, № 7-8 (2016)
- Страницы: 786-801
- Раздел: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/239105
- DOI: https://doi.org/10.1007/s11015-016-0368-6
- ID: 239105
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
Published experimental data about steel forging ingot chemical inhomogeneity with different steel weight and composition are summarized. An equation is obtained for calculating the carbon liquation factor over an ingot cross section in relation to weight and configuration (H/D ratio), and also on original carbon and sulfur content in cast steel.
Об авторах
A. Romashkin
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Автор, ответственный за переписку.
Email: an_romashkin@cniitmash.ru
Россия, Moscow
V. Dub
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Россия, Moscow
D. Tolstykh
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Россия, Moscow
I. Ivanov
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Россия, Moscow
A. Mal’ginov
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Россия, Moscow
Дополнительные файлы
