🔧На сайте запланированы технические работы
25.12.2025 в промежутке с 18:00 до 21:00 по Московскому времени (GMT+3) на сайте будут проводиться плановые технические работы. Возможны перебои с доступом к сайту. Приносим извинения за временные неудобства. Благодарим за понимание!
🔧Site maintenance is scheduled.
Scheduled maintenance will be performed on the site from 6:00 PM to 9:00 PM Moscow time (GMT+3) on December 25, 2025. Site access may be interrupted. We apologize for the inconvenience. Thank you for your understanding!

 

检索

标题
作者
Possibility of Preparing Alloys of the Al–Si System Using Amorphous Microsilica
Kuz’min M., Kondrat’ev V., Larionov L., Kuz’mina M., Ivanchik N.
Preparation of Aluminum–Carbon Nanotubes Composite Material by Hot Pressing
Kuz’min M., Ivanov N., Kondrat’ev V., Grigor’ev V., Kuz’mina M., Begunov A., Kuz’mina A., Ivanchik N.
Intermetallic Compound Formation During Reaction of Molten Aluminum with Titanium
Gurevich L., Shmorgun V.
Optimization of the Composition and Amount of Nonmetallic Inclusions in a Continuously Cast Billet Based on the Deoxidation of the Melt with Aluminum and Calcium Carbide
Rutskii D., Babin G., Gamanyuk S., Morozov V., Kornev Y.
A Model of Heat Exchange in the Startup Period of an Electrolyzer Aimed at the Optimization of Voltage Reduction
Makeev A., Belolipetski V., Piskazhova T., Portyankin A.
Experiment for Use of Bratsk Aluminum Plant Technogenic Waste as a Reducing Agent During Cast Iron Smelting
Nemchinova N., Yakushevich P., Yakovleva A., Gavrilenko L.
Analysis of Hydrogen Content in the Main Stages of Low-Alloy Aluminum Alloy Flat Ingot Manufacture
Belyaev S., Kulikov B., Deev V., Baranov V., Rakhuba E.
Investigation and Choice of Materials for the Electrical Insulation of the Steel Bloom of an Aluminum Electrolyzer
Shakhrai S., Mikhalev Y., Kalinovskaya T., Arkhipov G., Kalinovskaya T., Arkhipov G., Ivanova A.
Study of Perfluorocarbon Release During Aluminum Production in Vertical-Stud Electrolytic Cells with Self-Baking Anode in Between Anode Effects
Burkat V., Zor’ko K., Bozhko A., Spirin A., Rebrik I., Vasin S.
Increase in Electrolyzer Energy Efficiency with a Self-Baking Anode
Shakhrai S., Dekterev A., Skuratov A., Minakov A., Bazhin V.
Testing Baked Anodes with an Increased Vanadium Content
Gorlanov E., Batrachenko A., Smailov B., Skvortsov A.
Simulation of the Consolidation of a Porous Material in a Combined Rolling–Extrusion Process
Ershov A., Loginov Y., Zagirov N., Ivanov E.
Development of Manufacturing Technology for High-Sulfur Steel with a High Aluminum Content in the Volga Pipe Plant Electric-Melting Workshop
Bozheskov A., Toptygin A., Longinov A., Tinyakov V.
Production of Highly Reinforced Dispersion-Strengthened Composite Material Based on Aluminum by Internal Oxidation
Chernyshov E., Romanov A., Romanova E.
Simulation of the Energy States of Electrolyzers with Roasted Anodes at Elevated Currents
Sysoev I., Kondrat’ev V., Zimina T., Karlina A.
Solidification Conditions for High-Strength Aluminum Alloy Ingots with Increased Transition Metal Content
Bochvar S., Merkulova S.
Optical Monitoring of the Condition of Steel Anode Pins in Soderberg Electrolysis Cells
Bazhin V., Kul’chitskii A., Kadrov D., Petrov P.
Effect of Melt Treatment with Water Vapor on Thermal Expansion of Alloy Al – 20–40% Si
Afanas’ev V., Popova M., Dolgova S., Gorshenin A., Malyukh M.
Development of Tooling and Modes of Dispersion for Powders of Solder Aluminum Alloys
Uskov I., Gorokhov Y., Gubanov I., Gubanova M., Lesiv E.
Complete Evaluation of Extruded Aluminum Section and Semiproduct Mechanical Properties Under Conditions of Typical Regional Manufacturer Altek
Smirnov E., Sklyar V., Mitrofanov M., Smirnov O., Belevitin V., Smirnov A.
Production Technology Features for Aluminum Matrix Alloys with a Silicon Carbide Framework
Bazhin V., Gutema E., Savchenkov S.
Plasma Welding of Aluminum Alloys with the Use of Two Direct ARCS on Reverse-Polarity Current
Shchitsyn Y., Belinin D., Shchitsyn V., Neulybin S.
Effect of Impurities on the Phase Composition and Properties of a New Alloy of the Al–Y–Er–Zr–Sc System
Pozdnyakov A., Barkov R.
Microstructure and Mechanical Properties of Objects Prepared by Selective Laser Melting of AKD12 Powder
Fefelov A., Merkushev A., Chikova O., Finkel’shtein A.
Corrosion Resistance and Mechanical Properties of Layered Structural Material Based on Aluminum Alloy and Fiberglass Thin Sheets
Shestov V., Antipov V., Ryabov D.
1 - 25 的 43 信息 1 2 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语