Мақаланы E-mail арқылы жіберу Prediction of Carbon Liquation in Steel Forging Ingot Cross Section
- Авторлар: Romashkin A.N.1, Dub V.S.1, Tolstykh D.S.1, Ivanov I.A.1, Mal’ginov A.N.1
-
Мекемелер:
- Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
- Шығарылым: Том 60, № 7-8 (2016)
- Беттер: 786-801
- Бөлім: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/239105
- DOI: https://doi.org/10.1007/s11015-016-0368-6
- ID: 239105
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
Published experimental data about steel forging ingot chemical inhomogeneity with different steel weight and composition are summarized. An equation is obtained for calculating the carbon liquation factor over an ingot cross section in relation to weight and configuration (H/D ratio), and also on original carbon and sulfur content in cast steel.
Авторлар туралы
A. Romashkin
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Хат алмасуға жауапты Автор.
Email: an_romashkin@cniitmash.ru
Ресей, Moscow
V. Dub
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Ресей, Moscow
D. Tolstykh
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Ресей, Moscow
I. Ivanov
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Ресей, Moscow
A. Mal’ginov
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Ресей, Moscow
Қосымша файлдар
