Enviar artigo por via de e-mail Prediction of Carbon Liquation in Steel Forging Ingot Cross Section
- Autores: Romashkin A.N.1, Dub V.S.1, Tolstykh D.S.1, Ivanov I.A.1, Mal’ginov A.N.1
-
Afiliações:
- Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
- Edição: Volume 60, Nº 7-8 (2016)
- Páginas: 786-801
- Seção: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/239105
- DOI: https://doi.org/10.1007/s11015-016-0368-6
- ID: 239105
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Published experimental data about steel forging ingot chemical inhomogeneity with different steel weight and composition are summarized. An equation is obtained for calculating the carbon liquation factor over an ingot cross section in relation to weight and configuration (H/D ratio), and also on original carbon and sulfur content in cast steel.
Sobre autores
A. Romashkin
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Autor responsável pela correspondência
Email: an_romashkin@cniitmash.ru
Rússia, Moscow
V. Dub
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Rússia, Moscow
D. Tolstykh
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Rússia, Moscow
I. Ivanov
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Rússia, Moscow
A. Mal’ginov
Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)
Email: an_romashkin@cniitmash.ru
Rússia, Moscow
Arquivos suplementares
