Email this article Choice of Binder and Optimization of Slag-Forming Mixture Granulation Technology to Improve Granule Strength
- Authors: Ryakhov A.A.1, Kuklev A.V.2, Anisimov K.N.3, Toptygin A.M.2,3, Lebedev I.V.3
-
Affiliations:
- Shlakservis Company
- NPO Korad
- Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
- Issue: Vol 60, No 9-10 (2017)
- Pages: 1054-1061
- Section: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/239491
- DOI: https://doi.org/10.1007/s11015-017-0407-y
- ID: 239491
Cite item
Open Access
Access granted
Subscription Access
Abstract
A procedure is described for qualitative evaluation of the effect of binders on granulated slag-forming mixture (SFM) strength. A relationship is established for slip density and finished granulate bulk density on water content. Industrial tests are conducted for a new binder and a test batch of granulated SFM is prepared with a low proportion of dusty fraction for pouring steel in a CBCM at MMK.
About the authors
A. A. Ryakhov
Shlakservis Company
Author for correspondence.
Email: ryakhov.aa@mmk.ru
Russian Federation, Magnitogorsk
A. V. Kuklev
NPO Korad
Email: ryakhov.aa@mmk.ru
Russian Federation, Moscow
K. N. Anisimov
Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: ryakhov.aa@mmk.ru
Russian Federation, Moscow
A. M. Toptygin
NPO Korad; Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: ryakhov.aa@mmk.ru
Russian Federation, Moscow; Moscow
I. V. Lebedev
Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: ryakhov.aa@mmk.ru
Russian Federation, Moscow
Supplementary files
