Enviar artigo por via de e-mail Choice of Binder and Optimization of Slag-Forming Mixture Granulation Technology to Improve Granule Strength
- Autores: Ryakhov A.A.1, Kuklev A.V.2, Anisimov K.N.3, Toptygin A.M.2,3, Lebedev I.V.3
-
Afiliações:
- Shlakservis Company
- NPO Korad
- Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
- Edição: Volume 60, Nº 9-10 (2017)
- Páginas: 1054-1061
- Seção: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/239491
- DOI: https://doi.org/10.1007/s11015-017-0407-y
- ID: 239491
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A procedure is described for qualitative evaluation of the effect of binders on granulated slag-forming mixture (SFM) strength. A relationship is established for slip density and finished granulate bulk density on water content. Industrial tests are conducted for a new binder and a test batch of granulated SFM is prepared with a low proportion of dusty fraction for pouring steel in a CBCM at MMK.
Palavras-chave
Sobre autores
A. Ryakhov
Shlakservis Company
Autor responsável pela correspondência
Email: ryakhov.aa@mmk.ru
Rússia, Magnitogorsk
A. Kuklev
NPO Korad
Email: ryakhov.aa@mmk.ru
Rússia, Moscow
K. Anisimov
Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: ryakhov.aa@mmk.ru
Rússia, Moscow
A. Toptygin
NPO Korad; Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: ryakhov.aa@mmk.ru
Rússia, Moscow; Moscow
I. Lebedev
Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: ryakhov.aa@mmk.ru
Rússia, Moscow
Arquivos suplementares
