Effect of Aging on the Microstructure and Mechanical Properties of Magnesium Alloy AZ31
- Авторлар: Kerenciler H.1, Gündüz S.2, Erden M.A.2, Türkmen M.3, Karabulut H.4
-
Мекемелер:
- Karabük University, Institute of Science and Technology, Department of Manufacturing Engineering
- Karabük University, Technology Faculty, Department of Manufacturing Engineering
- Kocaeli Iniversity, Hereke Vocational School, Department of Metallurgy
- Karabük University, Vocational School, Department of Occupational Health and Safety
- Шығарылым: Том 58, № 3-4 (2016)
- Беттер: 179-184
- Бөлім: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235449
- DOI: https://doi.org/10.1007/s11041-016-9985-8
- ID: 235449
Дәйексөз келтіру
Аннотация
The structure and mechanical properties of magnesium alloy AZ31 are studied after conventional and deformation aging under conditions corresponding to the thermal cycle of polymerization in paint coating of cars. The aging is conducted after 3-h solution treatment at 400°C, water quenching, and aging at 180°C for from 10 min to 6 h. Some of the specimens are deformed by 0.5% right after the solution treatment and then aged by the same regime.
Авторлар туралы
H. Kerenciler
Karabük University, Institute of Science and Technology, Department of Manufacturing Engineering
Хат алмасуға жауапты Автор.
Email: kerencihuseyin@gmail.com
Түркия, Karabük
S. Gündüz
Karabük University, Technology Faculty, Department of Manufacturing Engineering
Email: kerencihuseyin@gmail.com
Түркия, Karabük
M. Erden
Karabük University, Technology Faculty, Department of Manufacturing Engineering
Email: kerencihuseyin@gmail.com
Түркия, Karabük
M. Türkmen
Kocaeli Iniversity, Hereke Vocational School, Department of Metallurgy
Email: kerencihuseyin@gmail.com
Түркия, Kocaeli-Gebze
H. Karabulut
Karabük University, Vocational School, Department of Occupational Health and Safety
Email: kerencihuseyin@gmail.com
Түркия, Karabük
Қосымша файлдар
