Special Features of Formation of Martensitic Phases in the Austenite of Chromium-Nickel Steels under Plastic Deformation
- Authors: Ol’shanetskii V.E.1, Snezhnoy G.V.1, Snezhnoy V.L.2
 - 
							Affiliations: 
							
- Zaporozhe National Technical University
 - Zaporozhe National University
 
 - Issue: Vol 60, No 3-4 (2018)
 - Pages: 165-171
 - Section: Article
 - URL: https://journals.rcsi.science/0026-0673/article/view/236305
 - DOI: https://doi.org/10.1007/s11041-018-0255-9
 - ID: 236305
 
Cite item
Abstract
Three variants of behavior of austenitic chromium-nickel steels with different degrees of austenite stability under cold compressive plastic deformation are considered. The susceptibility of the steels to formation of the first portions of ferromagnetic α′-martensite and paramagnetic ε-martensite is shown to differ depending on the composition of the steel and on the degree of the deformation. The possibility of nucleation and transformation of an intermediate paramagnetic ε-phase and ferromagnetic α′-martensite in the chromium-nickel steels with moderately unstable martensite under plastic deformation is demonstrated.
About the authors
V. E. Ol’shanetskii
Zaporozhe National Technical University
														Email: snow@zntu.edu.ua
				                					                																			                												                	Ukraine, 							Zaporozhe						
G. V. Snezhnoy
Zaporozhe National Technical University
														Email: snow@zntu.edu.ua
				                					                																			                												                	Ukraine, 							Zaporozhe						
V. L. Snezhnoy
Zaporozhe National University
							Author for correspondence.
							Email: snow@zntu.edu.ua
				                					                																			                												                	Ukraine, 							Zaporozhe						
Supplementary files
				
			
					
						
						
						
						
				