Special Features of Formation of Martensitic Phases in the Austenite of Chromium-Nickel Steels under Plastic Deformation
- Authors: Ol’shanetskii V.E.1, Snezhnoy G.V.1, Snezhnoy V.L.2
-
Affiliations:
- Zaporozhe National Technical University
- Zaporozhe National University
- Issue: Vol 60, No 3-4 (2018)
- Pages: 165-171
- Section: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/236305
- DOI: https://doi.org/10.1007/s11041-018-0255-9
- ID: 236305
Cite item
Abstract
Three variants of behavior of austenitic chromium-nickel steels with different degrees of austenite stability under cold compressive plastic deformation are considered. The susceptibility of the steels to formation of the first portions of ferromagnetic α′-martensite and paramagnetic ε-martensite is shown to differ depending on the composition of the steel and on the degree of the deformation. The possibility of nucleation and transformation of an intermediate paramagnetic ε-phase and ferromagnetic α′-martensite in the chromium-nickel steels with moderately unstable martensite under plastic deformation is demonstrated.
About the authors
V. E. Ol’shanetskii
Zaporozhe National Technical University
Email: snow@zntu.edu.ua
Ukraine, Zaporozhe
G. V. Snezhnoy
Zaporozhe National Technical University
Email: snow@zntu.edu.ua
Ukraine, Zaporozhe
V. L. Snezhnoy
Zaporozhe National University
Author for correspondence.
Email: snow@zntu.edu.ua
Ukraine, Zaporozhe
Supplementary files
