| Edição |
Título |
Arquivo |
| Volume 57, Nº 11-12 (2016) |
Evolution of the Structure of Local Regions of Fused Metal in Explosion-Welded Nickel-Aluminum Composites Under Heat Treatment |
(Eng)
|
|
Shmorgun V., Bogdanov A., Gurevich L.
|
| Volume 57, Nº 11-12 (2016) |
Effects of Aging on the Evolution of Microstructure and Mechanical Properties of an Al – Li – Cu – Mg Alloy with Ag, Zr, Mn, and Zn Additives |
(Eng)
|
|
Sun Z., Bao P., Ma C., Chen J., Guo X., Li H., Ling J.
|
| Volume 57, Nº 11-12 (2016) |
Raising the Structural Strength of Systematically Alloyed Fe – Cr – Ni – Mo-Base Maraging Steels |
(Eng)
|
|
Gladkovskii S., Ishina E., Kuteneva S.
|
| Volume 57, Nº 11-12 (2016) |
Twip-Effect in Nickel-Free High-Nitrogen Austenitic Cr – Mn Steels |
(Eng)
|
|
Berezovskaya V., Raskovalova Y., Merkushkin E., Valiev R.
|
| Volume 57, Nº 11-12 (2016) |
Optimization of Heat Treatment Modes of Steel 4Kh5MFS for Metal Conduits of Hot-Chamber Pressure Casting Machines According to Results of Endurance Tests in Molten TsAM-4-1 |
(Eng)
|
|
Kolesnikov M., Mukhametzyanova G., Zubkov E.
|
| Volume 57, Nº 11-12 (2016) |
A Study of the Effect of Two-Stage Tempering on Mechanical Properties of Steel 30CrMnSi Using Analysis on Response Surface in Design of Experiment |
(Eng)
|
|
Nekouei R., Akhaghi R., Ravanbakhsh A., Tahmasebi R., Moghaddam A., Mahrouei M.
|
| Volume 57, Nº 11-12 (2016) |
Structure and Mechanical Properties of Shape-Memory Alloys of the Ti – Ni – Cu System |
(Eng)
|
|
Pushin V., Kuranova N., Pushin A.
|
| Volume 57, Nº 11-12 (2016) |
Raising the Fatigue Resistance of Titanium Alloys by High-Speed Deformation in the Range of Polymorphic Transformations |
(Eng)
|
|
Grechnikov F., Khaimovich A.
|
| Volume 57, Nº 11-12 (2016) |
Elimination of Coarse-Grain Property in Steel 25KhN3MFA After Overheating to Different Temperatures |
(Eng)
|
|
Borisov I., Dub A.
|
| Volume 57, Nº 11-12 (2016) |
Special Features of Friction Treatment of Steels of the Spring Class |
(Eng)
|
|
Baraz V., Fedorenko O.
|
| Volume 57, Nº 11-12 (2016) |
Changes in the Structure and Properties Under Deformation of Austenitic-Ferritic Steel at Room and Negative Temperatures |
(Eng)
|
|
Mal’tseva L., Levina A., Loginov Y., Gladkovskii S., Mal’tseva T., Demidov S., Khadyev M.
|
| Volume 57, Nº 11-12 (2016) |
Structural and Phase State of Fractured Rotor of High-Pressure Steam Turbine |
(Eng)
|
|
Popova N., Smirnov A., Ababkov N., Kozlov E., Koneva N.
|
| Volume 57, Nº 9-10 (2016) |
Structural Changes Caused by High-Temperature Holding of Powder Shape Memory Alloy 66% Fe – 14% Mn – 6% Si – 9% Cr – 5% Ni |
(Eng)
|
|
Pricop B., Özkal B., Söyler U., Van Humbeeck J., Lohan N., Suru M., Spiridon I., Bujoreanu L.
|
| Volume 57, Nº 9-10 (2016) |
Effect of Annealing Time and Cooling Rate on Precipitation Processes in a Duplex Corrosion-Resistant Steel |
(Eng)
|
|
Kisasoz A., Gurel S., Karaaslan A.
|
| Volume 57, Nº 9-10 (2016) |
Application of Magnetic Kinds of Nondestructive Inspection to Parts From Die Tool Steels |
(Eng)
|
|
Kornilova A., Selishchev A., Idarmachev I.
|
| Volume 57, Nº 9-10 (2016) |
Analysis of Phase Transformations of Supercooled Austenite in Low-Alloy Steel with Boron Additives |
(Eng)
|
|
Łętkowska B., Dziurka R., Bała P.
|
| Volume 57, Nº 9-10 (2016) |
Strain Hardening Curves and Mechanical Properties of a Chromium-Base Refractory Alloy as a Function of Heat Treatment and Test Temperature |
(Eng)
|
|
Adaskin A., Butrim V., Kubatkin V., Sapronov I.
|
| Volume 57, Nº 9-10 (2016) |
Special Features of Electron-Beam Alloying of Replaceable Polyhedral Hard-Alloy Plates Under a Complex Surface Treatment |
(Eng)
|
|
Fedorov S., Oganyan G.
|
| Volume 57, Nº 9-10 (2016) |
Determination of the Hollomon Parameter for a Chromium-Base Refractory Alloy with the Aim of Predicting its Properties |
(Eng)
|
|
Adaskin A., Butrim V., Kremnev L., Kubatkin V., Sapronov I.
|
| Volume 57, Nº 9-10 (2016) |
A Study of the Structure of Nickel Aluminide After Laser Treatment |
(Eng)
|
|
Kotoban D., Shishkovskii I.
|
| Volume 57, Nº 9-10 (2016) |
Formation of Structure in Hard-Alloy Coatings from Powders Under Passage of a Powerful Pulse of Electric Current |
(Eng)
|
|
Novikov S., Peretyagin P., Dolzhikova E., Torrecillas R.
|
| Volume 57, Nº 9-10 (2016) |
Optimization of Parameters of Laser Surfacing of Alloys of the Al – Si System |
(Eng)
|
|
Grigor’ev S., Tarasova T., Gvozdeva G.
|
| Volume 57, Nº 9-10 (2016) |
Mechanical Characteristics of Welded Joints of Aluminum Alloy 6061 T6 Formed by Arc and Friction Stir Welding |
(Eng)
|
|
Astarita A., Squillace A., Nele L.
|
| Volume 57, Nº 9-10 (2016) |
Study of the Effect of Modes of Electroerosion Treatment on the Microstructure and Accuracy of Precision Sizes of Small Parts |
(Eng)
|
|
Korobova N., Aksenenko A., Bashevskaya O., Nikitin A.
|
| Volume 57, Nº 9-10 (2016) |
Nanostructured Multilayer Composite Coatings on Ceramic Cutting Tools for Finishing Treatment of High-Hardness Quenched Steels |
(Eng)
|
|
Vereshchaka A., Batako A., Sotova E., Vereshchaka A.
|
| 326 - 350 de 350 resultados |
<< < 9 10 11 12 13 14
|
