Enviar artigo por via de e-mail Analysis of Phase Transformations of Supercooled Austenite in Low-Alloy Steel with Boron Additives
- Autores: Łętkowska B.1, Dziurka R.2, Bała P.2
-
Afiliações:
- Department of Materials Science, Welding and Strength of Materials, Wrocław University of Technology
- Department of Physical and Powder Metallurgy, AGH University of Science and Technology
- Edição: Volume 57, Nº 9-10 (2016)
- Páginas: 525-530
- Seção: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235143
- DOI: https://doi.org/10.1007/s11041-016-9916-8
- ID: 235143
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Adiagram of transformations in low-alloy boron-containing steel B27 with high resistance to abrasive wear is plotted under continuous cooling. Chemical, metallographic and dilatometric analyses are performed, and the hardness of the steel is measured. Continuous cooling curves are obtained from the temperature of austenitization at a rate of 0.17 – 25 K/sec in the temperature range of 800 – 500°C.
Sobre autores
B. Łętkowska
Department of Materials Science, Welding and Strength of Materials, Wrocław University of Technology
Email: petroprom2013@yandex.ru
Polônia, Wroclaw
R. Dziurka
Department of Physical and Powder Metallurgy, AGH University of Science and Technology
Email: petroprom2013@yandex.ru
Polônia, Krakow
P. Bała
Department of Physical and Powder Metallurgy, AGH University of Science and Technology
Email: petroprom2013@yandex.ru
Polônia, Krakow
Arquivos suplementares
