Structure and Mechanical Properties of a Three-Layer Steel/Vanadium Alloy/Steel Material After Radial Forging

T. A. Nechaikina; A. B. Rozhnov; S. O. Rogachev; V. Yu. Turilina; S. A. Nikulin

doi:10.1007/s11041-018-0266-6

Structure and Mechanical Properties of a Three-Layer Steel/Vanadium Alloy/Steel Material After Radial Forging

Authors: Nechaikina T.A.¹, Rozhnov A.B.¹, Rogachev S.O.¹, Turilina V.Y.¹, Nikulin S.A.¹
Affiliations:
1. National Research Technological University “MISiS,”
Issue: Vol 60, No 3-4 (2018)
Pages: 229-235
Section: Article
URL: https://journals.rcsi.science/0026-0673/article/view/236323
DOI: https://doi.org/10.1007/s11041-018-0266-6
ID: 236323

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The methods of optical and electron microscopy are used to study the structure of specimens of a three-layer material based on vanadium alloy V – 4% Ti – 4%Cr and ferritic steel 08Kh17T after radial forging conducted by simulated regimes of joint deformation. The mechanical properties of the three-layer material are studied in tensile tests of two-layer “steel/vanadium alloy” specimens.