Email this article Evaluation of Microstructure and Mechanical Properties of High-Strength Bainitic Cast Iron Using an Electromagnetic Sensor
- Authors: Kashefi M.1, Nateq M.H.1, Kahrobaee S.2
-
Affiliations:
- Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
- Department of Materials Engineering, Sadjad University of Technology
- Issue: Vol 59, No 5-6 (2017)
- Pages: 341-345
- Section: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235745
- DOI: https://doi.org/10.1007/s11041-017-0153-6
- ID: 235745
Cite item
Open Access
Access granted
Subscription Access
Abstract
High-strength bainitic cast iron is studied after isothermal hardening at 340°C for from 0.5 to 5 h with the use of a non-destructive eddy-current method for monitoring the microstructure and mechanical properties. Iron microstructure is studied by optical microscopy and x-ray diffraction analysis. Brinell hardness and the impact energy are determined. Correlation is established between electromagnetic sensor signal, microstructure, and mechanical properties. It is shown that induced voltage and normalized impedance may be used for non-destructive monitoring of the production process and cast iron quality.
About the authors
M. Kashefi
Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
Author for correspondence.
Email: m-kashefi@um.ac.ir
Iran, Islamic Republic of, Mashhad
M. H. Nateq
Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
Author for correspondence.
Email: mh.nateq@gmail.com
Iran, Islamic Republic of, Mashhad
S. Kahrobaee
Department of Materials Engineering, Sadjad University of Technology
Email: mh.nateq@gmail.com
Iran, Islamic Republic of, Mashhad
Supplementary files
