Enviar artigo por via de e-mail Evaluation of Microstructure and Mechanical Properties of High-Strength Bainitic Cast Iron Using an Electromagnetic Sensor
- Autores: Kashefi M.1, Nateq M.H.1, Kahrobaee S.2
-
Afiliações:
- Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
- Department of Materials Engineering, Sadjad University of Technology
- Edição: Volume 59, Nº 5-6 (2017)
- Páginas: 341-345
- Seção: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235745
- DOI: https://doi.org/10.1007/s11041-017-0153-6
- ID: 235745
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
High-strength bainitic cast iron is studied after isothermal hardening at 340°C for from 0.5 to 5 h with the use of a non-destructive eddy-current method for monitoring the microstructure and mechanical properties. Iron microstructure is studied by optical microscopy and x-ray diffraction analysis. Brinell hardness and the impact energy are determined. Correlation is established between electromagnetic sensor signal, microstructure, and mechanical properties. It is shown that induced voltage and normalized impedance may be used for non-destructive monitoring of the production process and cast iron quality.
Sobre autores
M. Kashefi
Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
Autor responsável pela correspondência
Email: m-kashefi@um.ac.ir
Irã, Mashhad
M. Nateq
Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
Autor responsável pela correspondência
Email: mh.nateq@gmail.com
Irã, Mashhad
S. Kahrobaee
Department of Materials Engineering, Sadjad University of Technology
Email: mh.nateq@gmail.com
Irã, Mashhad
Arquivos suplementares
