Отправить статью по E-mail Effect of Production Process on Microstructure and Mechanical Properties of Copper Coatings of Jet Charges
- Авторы: Gleener R.E.1, Cheerova M.N.1, Shadiev B.S.2, Katyukhin E.B.2
-
Учреждения:
- R. E. Alekseev Nizhegorodsky Engineering University
- Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
- Выпуск: Том 59, № 3-4 (2017)
- Страницы: 176-179
- Раздел: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235613
- DOI: https://doi.org/10.1007/s11041-017-0124-y
- ID: 235613
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
Special features of formation of the grain structure and mechanical properties of copper during recrystallization annealing after cold deformation with a wide range of reduction are studied. The constants of the Hall-Petch equation are determined for copper, the microstructure of which forms in the course of plastic deformation and subsequent heat treatment. The results of the study are allowed for in the process of production of claddings for jet charges.
Об авторах
R. Gleener
R. E. Alekseev Nizhegorodsky Engineering University
Автор, ответственный за переписку.
Email: gleen1@yandex.ru
Россия, Nizhny Novgorod
M. Cheerova
R. E. Alekseev Nizhegorodsky Engineering University
Email: gleen1@yandex.ru
Россия, Nizhny Novgorod
B. Shadiev
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Email: gleen1@yandex.ru
Россия, Sarov
E. Katyukhin
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Email: gleen1@yandex.ru
Россия, Sarov
Дополнительные файлы
